Japanese Tuji GL100 Multi functional Portable Data Recorder Communication Function: The GL100-N standard data collector can communicate with a computer through a USB interface to read data from the Japanese Tuji GL100 multifunctional portable data logger. It can also control the GL100-N to start or stop recording, change testing conditions, etc. GL100-N provides dedicated analysis software for free. The wireless version of the Japanese Tuji GL100 multifunctional portable data recorder can achieve wireless communication with a computer or GL240/GL840 through WIFI signals. The computer or GL240/GL840 recorder can remotely read data from the Japanese Tuji GL100 wl. The Japanese graphic technology GL100-wl can also be remotely operated through a computer.

content Real time viewing of temperature and humidity data is possible. The free software for GL100-N/GL100-WL mini temperature and humidity recorder can communicate with a PC computer through a randomly provided USB cable to view the temperature and humidity change curves. GL100-WL can communicate wirelessly with a computer or Japanese Tuji GL240/GL840 through WIFI signals

• ※1
  We use 2.4GHz radio waves.
  It can be used in China (excluding Hong Kong), Taiwan, Japan, the United States, Europe, and some regions.
  Please do not use it near the following environment, as communication speed may slow down due to radio interference and it may not be usable.
  ·Microwave oven
  ·Industry, Science, and Medical Equipment
  ·On the production line of the factory, a self established wireless telecommunications bureau (licensed wireless telecommunications bureau) is used to identify moving objects
  ·Specific small-scale power wireless telecommunications bureau (unlicensed wireless telecommunications bureau)
  ※2
  Condition:
  Temperature and humidity sensor (GS-TH) for recording and sampling temperature, humidity, dew point temperature, and accumulated temperature for 1 minute per file size, with a maximum file size of 1.9GB when connected to a power source
  ※3
  Please use the application software attached to the host to confirm the collected data.
  Condition 4: The CO2 sensor cannot use dry batteries.
  ※5
  Condition:
  Temperature and humidity sensor (GS-TH), 1-minute sampling, memory recording/no micro SD card/battery drive time varies depending on usage conditions and temperature
  Additionally, the battery drive time may vary depending on the module.
• 
  

※1

Cannot connect multiple PCs to GL100 simultaneously

※2

Only GL100-WL supports LAN.

We use 2.4GHz radio waves.

Wireless LAN connection is only available in Japan, the United States, and Europe. Other regions cannot use it due to lack of recognition under the Radio Law.

Please do not use it near the following environment, as communication speed may slow down due to radio interference and it may not be usable.

·Microwave oven

·Industry, Science, and Medical Equipment

·On the production line of the factory, a self established wireless telecommunications bureau (licensed wireless telecommunications bureau) is used to identify moving objects

·Specific small-scale power wireless telecommunications bureau (unlicensed wireless telecommunications bureau)

※3

Having a fixed IP or DDNS server

Attention) When connecting to the DDNS server, it is necessary to set up transmission to GL100 on the router on the WAN side and LAN side.

GL100 host specifications and accessories

project		content
Enter the number of ch		According to different types of sensor modules
Input terminal shape
Input method
External input/output		Alarm output 1ch
PC I/F		USB (Micro B connector), wireless LAN (GL100-WL only) ON-OFF setting possible (factory set to ON)
storage device		Built in RAM: approximately 4.9MByte External external storage: Micro SD memory card ※ 1.9GB/data file ※ It is recommended to use the micro SD TS4GUSDHC4 (Transcend) that supports standby mode
Backup function		Setting conditions: EEPROM Timetable: Backup capacitor Backup time for battery replacement: approximately 10 hours (at a temperature of 23 ℃)
monitor		LCD (black and white with backlight, graphic dot matrix) (128 × 64)
show contents		Measurement values, settings, etc ※ The collected data cannot be directly displayed on the host, please use the attachment.
wireless lan (GL100-WL only)		Specifications: IEEE802.11b Communication distance: about 40m ※ There may be differences depending on the usage environment. Real time transmission speed: up to 500ms
function	USB I/F	·Read measurement data, host settings (using PC application) ·Set up network (GL100-Network_Config using PC application)
	wireless lan	·Read measurement data, host settings (using PC application) ·Status monitoring, easy setup (using Android and iOS support for both end and end applications) ·Email sending and receiving function
Alarm output form		Insulated switch type Freeze frame: 30V, 50mA (allowable loss of 150mw)
trigger	condition	Start trigger: OFF · Level · Alarm · Date Stop trigger: OFF · Level · Alarm · Date
	judge	Combination: Grade OR · Grade AND Simulated CH judgment mode: uplink (↑) · downlink (↓) Level trigger function 4VT, 4TSR, 3AT (edge action)
Store content		Collect data
Easy waterproof host		IP54 Only when the host is connected to the sensor module, the connector, and the battery cover are tightly closed. Additionally, it is recommended to regularly replace the sealing strip
Shock resistance		Equivalent to the first Class A of automotive components
power supply		Dry battery 5, 2 batteries USB bus power supply (5V 200mA or above) When using an AC adapter for USB devices, a power supply of 5V.1A is required AC adapter is not standard.
Scope of use environment		-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]		66mm × 100mm × 27mm (excluding protruding parts)
Weight (approximately)		125g (GL100-N), 130g (GL100-WL)
Accessories		Instructions for use: 1 part Guarantee letter: 1 unit CD-ROM ： 1 piece USB (MicroB-A approximately 0.5m): 1 laptop

Temperature and humidity sensor GS-TH specification

project	content
summary	Temperature and humidity sensor GS-TH A sensor module that can simultaneously measure temperature and humidity. Can simultaneously measure a wide range of temperature (-20~85 ℃) and humidity (0~100% RH)
Types of measurement	Temperature, humidity, dew point temperature (calculated values) Accumulated temperature ℃ h (calculated value)
Measurement method	C-MOS sensor
Measuring temperature range	-20℃～ 85℃
Temperature measurement accuracy	-20 ≤ TS ＜ 0 ± 0.8 (℃) 0 ≤ TS ≤ 60 ± 0.5 (℃) 60 ＜ TS ≦ 85 ± 0.8 (℃)
Measure humidity range	0.0 ～ 100.0% RH
Measurement humidity accuracy	25℃ ±10% RH (0 ～ 10% RH） ±8% RH (10 ～ 20% RH） ±5% RH (20 ～ 80% RH） ±8% RH (80 ～ 90% RH） ±10% RH (90 ～ 100% RH）
Response time	Temperature and humidity: about 100 seconds (63% responded with an air flow rate of 1m/s at 25 ℃) ※ There may be differences depending on the usage environment.
Calculation function	Accumulated temperature: 0-99999k ℃ h Reset calculation from inclusion (cumulative temperature exceeding or falling below the reference temperature)
sampling interval	0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds, 1 · 2 · 5 · 10 · 20 · 30 · 60 minutes
alarm	OFF/Level
Temperature indicator	℃/°F
waterproof treatment	The sensor area is covered with waterproof film
Usage environment	Within the measuring range of the temperature and humidity meter (however, when placed in the same environment as the GL100 host, the host environment shall prevail)
Dimensions [W × D × H]	15mm × 45mm × 10.2mm (excluding protruding parts)
Weight (approximately)	14g

3-axis acceleration/temperature sensor GS-3AT specification

project		content
outline		3-axis acceleration/temperature sensor GS-3AT Sensor module capable of measuring 3-axis acceleration vibration (2G · 5G · 10G) and temperature (-10~50 ℃)
Types of measurement		Acceleration and temperature of X · Y · Z 3-axis
Acceleration range		±2G(20m/s2）± 5G (50m/s)2）± 10G (100m/s)2）(Gravity acceleration 1G=approximately 9.807m/s)2）
Accuracy of measuring acceleration (including non-linear types)		±2% of F.S.
zone		0Hz～100Hz
interfere		25mG rms
Measuring temperature range		-10 ℃~50 ℃<C-MOS sensor>
Temperature measurement accuracy		-10 ≤ TS ＜ 50 ± 1.0 (℃)
Response time (temperature)		About 300 seconds
Measurement mode		Storage mode, direct mode
storage capacity (Storage Mode)		16 · 32 · 64 · 128k sampling
Pre trigger (Storage Mode)		OFF/10·25·50·100%
sampling interval	Storage mode	5·10 · 20 · 50 · 100 ms
	direct mode	0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds, 1 · 2 · 5 · 10 · 20 · 30 · 60 minutes
Calculation function (Direct mode)	performance	Perform calculations on data obtained at 5ms intervals
	Types of Algorithms	1-way calculation of average, maximum, and effective values (no calculation OFF)
Temperature indicator		℃/°F
OFFSETADJUST function		ON ※ Function to adjust the current static acceleration value to 0
Dustproof and Waterproof		IP54
Cable length		About 20cm
Usage environment		-10-50 ℃, below 80% (non condensing)
Dimensions [W × D × H]		51mm × 36mm × 19.5mm (excluding protruding parts)
Weight (approximately)		64g

4-ch voltage/temperature terminal GS-4VT specification

project		content
summary		4-ch voltage/temperature terminal GS-4VT It can perform temperature measurements with a maximum voltage of 4ch (20mV~50V and 1-5V) or thermocouple (K or T type). Each ch can choose voltage and temperature. In addition, logic (diagram) and pulse (counting) measurements can also be performed.
Types of measurement		Voltage/temperature, logic/pulse (instantaneous, cumulative)
Measure ch		Voltage/Temperature 4ch
		Logic/pulse 4ch
Measure voltage range		20 · 50 · 100 · 200 · 500mV, 1 · 2 · 5 · 10 · 20 · 50V 1-5V F.S
Measurement voltage accuracy		0.15% of F.S.
Input impedance/input method		1M Ω± 5% full channel insulated input
temperature coefficient		GAIN: 0.01% of F.S./℃ Zero: 0.02% of F.S./℃
Allowable signal source impedance		Below 300 Ω
Maximum input voltage		Input terminal+/- interval: 60Vp-p Input terminal/Input terminal interval: 60Vp-p Input terminal/GND interval: 60Vp-p
withstanding voltage		Input terminal/between input terminals: 350Vp-p 1 minute Input terminal/GND: 350Vp-p 1 minute
Insulation resistance		Between input terminal and GND: 50M Ω or above (DC500V)
COMMON mode removes ratio		90dB or above (50/60Hz signal source below 300 Ω)
interfere		Above 48dB
Measuring temperature range		<Thermocouple>K: -200.0 ℃~1370.0 ℃ T: - 200.0℃～ 400.0℃
Determination of temperature accuracy (Reference contact compensation accuracy ± 0.5 ℃)	K-type thermocouple	-200 ≤ TS ≤ -100 ± (0.05% of RDG+2.0 ℃)
		-100 ＜ TS ≤ 1370 ℃± (0.05% of RDG+1.0 ℃)
	T-type thermocouple	-200 ≤ TS ≤ -100 ± (0.1% of RDG+1.5 ℃)
		-100 ＜ TS ≤ 400 ℃± (0.1% of RDG+0.5 ℃)
Short circuit detection function		have
Logic/pulse input	Input Voltage	0~+24V (wire grounded input)
	Input signal	No voltage contact (contact a, contact b NO、NC）、 Open circuit collector, voltage input
	Input threshold voltage	Approximately+2.5V
	Hysteresis value	About 0.5V (+2V~+2.5V)
Pulse measurement range		Instantaneous: Maximum 200C/sample Cumulative value: Maximum 65535C (press QUIT key or start recording to reset)
Room temperature compensation		ＯＮ / ＯＦＦ
Temperature indicator		℃/°F
sampling interval		0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds, 1 · 2 · 5 · 10 · 20 · 30 · 60 minutes
Cable length		About 20cm
Usage environment		-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]		46mm × 66mm × 35.5mm (excluding protruding parts)
Weight (approximately)		85g

4-ch temperature sensor input terminal GS-4TSR specification

project		content
summary		4-ch temperature sensor input terminal GS-4TSR Supports 2 types of thermistor sensors (optional) (GS-103AT-4P/GS-103JT-4P), capable of measuring temperatures up to 4ch (-40.0~105.0 ℃ (when GS-103AT-4P) or:- 40.0-120.0 ℃ (at GS-103JT-4P). In addition, logic (diagram) and pulse (counting) measurements can also be performed
Types of measurement		Temperature, logic/pulse (instantaneous, cumulative)
Measure CH	temperature	4ch
	Logic/Pulse	4ch
Input method		Scanning type, non insulated, 2 types of thermistor sensors
Measuring temperature range		Supports 2 types of thermistor sensors (optional) Type A：-40.0～105.0℃（GS-103AT-4P） Type J：-40.0～120.0℃（GS-103JT-4P）
Measuring temperature	Accuracy of the host part	-40 ≤ TS ＜ 0 ± 0.7 (℃) 0 ≤ TS ≤ 35 ± 0.2 (℃) 35 ＜ TS ≦ 70 ± 0.4 (℃) 70 ＜ TS ≦ 120 ± 1.0 (℃)
	thermistor	± 0.4 ℃ (representative value) GS-103AT-4P / GS-103JT-4P
Logic/pulse input	Input Voltage	0~+24V (wire grounded input)
	Input signal	No voltage contact (contact a, contact b NO、NC）、 Open circuit collector, voltage input
	Input threshold voltage	Approximately+2.5V
	Hysteresis value	About 0.5V (+2V~+2.5V)
Pulse measurement range		Instantaneous: Maximum 200C/sample Accumulated value: Maximum 65535C (can be cleared by pressing the 【 QUIT 】 key or starting recording)
Temperature indicator		℃/°F
sampling interval		0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds, 1 · 2 · 5 · 10 · 20 · 30 · 60 minutes
Cable length		About 20cm
Usage environment		-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]		46mm × 66mm × 35.5mm (excluding protruding parts)
Weight (approximately)		83g

Illumination/UV Sensor GS-LXUV Specification

project		content
summary		Illumination/UV sensor GS-LXUV Can simultaneously measure illuminance (0 lx~200k lx) and ultraviolet radiation (0~30mW/cm)2）The sensor.
Types of measurement		Illumination, UV intensity, cumulative illumination (cumulative display only in inclusion), cumulative UV intensity (cumulative display only in inclusion)
Measure ch	illuminance	1ch
	UV intensity	1ch
measuring range	illuminance	0 lx ～ 200k lx
	UV intensity	0 ～ 30mW/cm2
measurement accuracy	illuminance	±5%
	UV intensity	±5%
Spectral accuracy	illuminance	400-750nm (up to 560nm)
	UV intensity	260-400nm (up to 370nm)
Determination of decomposition energy	illuminance	0.1 lx
	UV intensity	0.001mW/cm2
responsiveness	illuminance	Less than 1ms
	UV intensity	Less than 1ms
Calculation function	Accumulated illuminance	0 ～ 999,999klxh
	Accumulated UV intensity	0 ～ 999,999W/cm2h ※ You can re count by pressing the [QUIT] key or starting recording
sampling interval		0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds, 1 · 2 · 5 · 10 · 20 · 30 · 60 minutes
Cable length		About 20cm
Usage environment		-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]		46mm × 66mm × 19mm (excluding protruding parts)
Weight (approximately)		65ｇ

CO2 Sensor GS-CO2 Specification

project	content
outline	CO2 sensor GS-CO2 Can measure CO2Sensors within the concentration range of 0-9999ppm.
Sensor method	NDIR method (non dispersive infrared absorption method)
Types of measurement	CO2concentration
Measure ch	1ch
Measurement concentration range	0~9999ppm (5001~9999ppm is outside of ensuring accuracy)
Measurement of concentration accuracy	±(5% of rdg + 30ppm）0～5000ppm
Responsiveness	Less than 3 points
Sampling interval	0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds 1 · 2 · 5 · 10 · 20 · 30 · 60 min (GS-CO2 sampling is 2 sec)
calibration	ON / OFF
The length of the wire	About 20cm
Usage environment	0-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]	66mm × 100mm × 24.6mm (excluding protruding parts)
Weight (approximately)	99g

AC AC current sensor adapter GS-DPA-AC specification

project		content
outline		AC AC current sensor adapter GS-DPA-AC The AC current sensor can measure the power of single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, etc. by connecting the 50A clamp current probe (GS-AC50A), 100A clamp current probe (GS-AC100A), and 200A clamp current probe (GS-AC200A).
Connectable sensors		50A clamp type current probe (GS-AC50A) 100A clamp type current probe (GS-AC100A) 200A clamp type current probe (GS-AC200A) ※ Options
Types of measurement		Current, electricity, cumulative electricity (cumulative display is only available for inclusion)
Measure ch		The maximum number of sensors that can be connected is 2ch
Input method		RMS converter+scanning, non insulated input 3 types of AC sensors connected
Measurement accuracy of current		<Body+Sensor> ±2.0% FS ± 1digit Surrounding temperature of 23 ℃, freeze input, freeze frequency
Measure the frequency of the object being measured		50Hz / 60Hz
Applicable circuit		Single phase 2-wire single-phase 3-wire or three-phase 3-wire
Measurement value display function		Current, electricity (instantaneous electricity, cumulative electricity)
Calculation function		Accumulated electricity: 0~999999 kWh * recalculated from inclusion onwards
Measure grid current once		GS-AC50A ：50A
		GS-AC100A：100A
		GS-AC200A：200A
Voltage endurance		AC1000V、50/60Hz、1min Between the body and the input/output terminals
Sampling interval		0.5 · 1 · 2 · 5 · 10 · 20 · 30 seconds 1 · 2 · 5 · 10 · 20 · 30 · 60 min
Cable length	Adapter for AC current sensor	About 20cm
	AC current sensor	About 20cm
Usage environment		-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]		46mm × 66mm × 27.4mm (excluding protruding parts)
Weight (approximately)		55g

GS AC current sensor adapter GS-DPA specification

project	content
summary	GS bifurcation adapter GS-DPA A converter that can freely combine two out of three temperature and humidity sensors (GS-TH), CO2 sensors (GS-CO2), and illuminance/ultraviolet sensors (GS-LXUV) for measurement.
Number of connectors	2ch
Sensors that can be connected	GS-TH, GS-CO2, GS-LXUV (cannot use the same sensor)
Cable length	About 20cm
Usage environment	-10-50 ℃, below 80% RH (non condensing)
Dimensions [W × D × H]	46mm × 66mm × 27.4mm (excluding protruding parts)
Weight (approximately)	68g

GL100-APS specification

project	content
Support OS	Windows 8.1/8/7/Vista (64/32bit)
Connection method	USB、 wireless lan
function	Host control, real-time data recording, file conversion, data regeneration
Ontology setting scope	Input settings, recording settings, alarm settings, trigger settings
Collect data	Real time data (GBD binary CSV) Host records data SD card data
show contents	Analog waveform, logic waveform, pulse waveform, digital value
display mode	Y-T display, numerical display, statistical/historical display, X-Y display between cursor (only for playback)
file conversion	Cursor spacing, full data, playback function
monitoring function	Alert monitoring regularly sends messages to designated email addresses.
Report function	Automatically generate daily and monthly report files

GL100 Network Config Specification

project	content
Support OS	Windows 8.1/8/7/Vista (64/32bit)
Connection method	USB
function	USB driver installation, GL100 update and upgrade Time synchronization function, machine name setting, wireless LAN setting, email sending and receiving setting

Software specifications for smart devices

project	content
Support OS	iOS(7.0～)、Android（4.3～）
Connection method	wireless lan
function	Digital display, waveform display (only for playback), recording start/stop control, sampling interval update, email transmission control function, customization function