Shanghai Bangwo Instrument Equipment Co., Ltd
Home>Products>Jiaxing Hengsheng HS6228 noise meter
Jiaxing Hengsheng HS6228 noise meter
Jiaxing Hengsheng HS6228 noise meter
Product details


This instrument adopts advanced digital filtering and digital detection technology (frequency weighted ACZ and time weighted FSI are both calculated through digital filtering and digital detection), which can simultaneously measure (in parallel) and display the sound levels of different time weights (Fast, Slow, Impulse, Peak) and different frequency weights (A, C, Z) (Peak only works at C weight). It has the advantages of high reliability, good stability, and wide dynamic range. This instrument adopts a 160 × 160 dot matrix LCD display with background light display. It has two operation interfaces in Chinese and English, with rich display content and easy user operation. The measurement results can be stored in the instrument for a long time, and can be printed on site or later using a micro printer or sent to a computer for processing through the built-in RS-232 interface.

This instrument has a compact structure, beautiful appearance, multiple functions, and high degree of automation. It can be widely used in fields such as environmental protection, labor hygiene, industrial enterprises, scientific research and teaching.


  • Product Features


1. The measurement accuracy is in accordance with GB/T3785 (IEC61672) standard level 1.

2. The dynamic range is greater than 100dB, and there is no need to convert the measurement range during measurement.

3. Can simultaneously complete three frequency weighting tasks A C、Z, Three types of time measurement weights F, S, and I.

4. Peak noise can be measured according to the peak Cpeak sound level of the new national standard.

5. It can simultaneously measure and display 10 measurement indicators, and also display graphics.

6. Complete digital signal processing, wide frequency response range, large dynamic range, and lower background noise.

7. Display the time-domain curve of noise level while measuring noise.

8. Scalable large capacity MicroSD card (TF card) storage, USB interface and RS232 interface.

9. The instrument has a 2M capacity FLASH memory inside.


  • Technical Parameter


1. Execution standard: GB/T3785-2010 (IEC61672:2002) Level 1

2 microphones: Φ 12.7mm (1/2 ") pre polarized test condenser microphone

3 frequency range: 10Hz~20kHz

Measurement range: 20dB~130dB (A), 23dB~130dB (C), 28dB~130dB

Scalable up to 140dB (depending on the sensitivity of the selected microphone)

5 Dynamic range: greater than 100dB (weighted by A)

6 Frequency Weighting: Parallel (Simultaneous) A, C, Z Weighting

7-time weighting: parallel (simultaneous) fast (F), slow (S), I (pulse), and Cpeak

8 Detector Characteristics: Digital Detection Technology

9 A/D bits: 24 bits

10 Sampling frequency: 48kHz

11 Display: 160 × 160 dot matrix LCD display with LED backlight.

12 level range: divided into high and low levels, with a linear range of ≥ 100dB for each level.

High: 30dB~130dB Low: 20dB~110dB

LCpeak: High: 70dB~133dB Low: 50dB~113dB

13 Main display content: Can simultaneously measure and display 10 measurement indicators or statisticsDistribution map, cumulative distribution map, 24-hour distribution map, calculated values of L1~L99.

14 Measurement time setting: Single group measurement time can be selected as 10s, 1min, 5min, 10min, 15min20min, 30min, 1h, 8h, 24h. Man (set manually within 24 hours).

15 main measurement indicators: Lxyi、Lxyp、Lxeq、Lxae、Lxmax、Lxmin、LxN、SD、E(DI%)。 X is A, C, Z, Y is F, S, I, N is 5, 10, 50, 90, 95

16 Data Storage: Only F1ash can store 3000 sets of single measurement results or 200 sets of hourly measurement results.

If an SD card is added, the storage capacity can be expanded to a maximum of 2G. Can store more measurement data.

17 Data processing software: Use HS7001 software to read data and SD card data files,Perform post-processing analysis and output a report.

18 Data export: The instrument F1ash and SD card data can be output through the RS-232 interface, and can also be connectedRead data files from the SD card through the USB interface.

19 outputs: AC output, RS-232 port, USB port.

20 power supply: 7.5V (5 LR6/AA/AM3 5th alkaline batteries) can work continuously for 24 hours.

21 Dimensions: 1 × b × h (mm) 290 × 82 × 40

22 Quality: 400g (excluding battery)

Working temperature: -10 ℃~50 ℃, relative humidity 20%~90%


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!