Jin JialeElectrode humidifierSeries diagram:





Technical parameters of JDC OEM matching humidifier (partial humidification capacity humidifier list):

Parameter	unit	JDC series OEM humidifier
		JDC 450A	JDC 450B	JDC 450C	JDC 910A	JDC 910B	JDC 910C	JDCl 322	JDCl 522	JDC 2030	JDC 2530	JDC 3030	JD04230	JDC8430
Steam quantity	Kg/ h	4	4	4	8	8	8	1 3	1 5	20	25	30	42	42
Working current	A	4.5	4.5	13.5	9	9	15.5	1 5	l 7	23	28.5	32	24*2	24*2*2
working voltage	V	3*380	0.8-0.4
adjustment range	Kg/ h	O.8-0.4		O.4-4	1.6-8.1			1 4-20		6 — 30			8.5-42	8.5-84
maximum power	Kw	3	3	3	6	6	6	9.8	11.3	1 5	18.8	22.5	32	64
Water level electrode	individual	2	1	l	1	2	1	2	2	2	2	2	2	2*2
heating electrode	individual	3	3	2	3	3	2	3	3	6	6	6	6	6*2
Number of barrels	individual	1	l	1	1	1	1	1	l	1	1	l	1	2
Steam pipe ф 22/29	mm	l	l	l	1		1	1	1
Steam pipe ф 30/40	mm						l		1	1	1	1	2*2	2*2
Inlet hose 4/6	m	l	1	1	1	l	I	1	1	l	1	l	l	l
Installation volume (length * width * height)	mm	182*160*385			215*l82*500			340*232*523		385*405*705			385*405*705	770*405*705
Drainage pipe diameter	mm	22 ／ 28
control voltage	Proportional adjustment	Input signal: Current 4-20.0-20mA.: Voltage: DC0 ～ 10V
control form	Switching quantity	Switching signal (ON/OFF)
	ambient temperature	0 ～ 50 ℃
environmental condition	ambient water quality	Ordinary tap water Inlet conductivity 125-1250us/cm
	Water inlet pressure	0.1 — 0.5MPa
	ambient humidity	Less than 80% RH
	Humidification tank inlet valve, drain valve, humidification control board (proportional adjustment or switch quantity), bracket backboard, steam hose, upper and lower water pipes, water replenishment box, etc
Composition and Main Features	Angry to the point of poetry, occupying a small area for convenient use with various air conditioners
Characteristics of Functions	The humidification tank is made of high insulation material that is resistant to high temperature, high pressure, corrosion, non-toxic and odorless, ensuring safety and reliability. The tank body is welded using seamless pressing technology
	Provide proportional adjustment and switch control methods, suitable for control requirements of different standard signals
	Each OEM system unit can achieve a maximum humidification capacity of 100kg/h through different component combinations
	Electrode plates made of special materials with high lifespan and resistance to electrolytic corrosion.

（For mobile access, please click here）



Technical parameters of JDC OEM matching humidifier（For mobile access, please click here）：

Parameter	unit	JDC series OEM humidifier
		JDC 450A	JDC 450B	JDC 450C	JDC 910A	JDC 910B	JDC 910C	JDCl 322	JDCl 522	JDC 2030	JDC 2530	JDC 3030	JD04230	JDC8430
Steam quantity	Kg/ h	4	4	4	8	8	8	1 3	1 5	20	25	30	42	42
Working current	A	4.5	4.5	13.5	9	9	15.5	1 5	l 7	23	28.5	32	24*2	24*2*2
working voltage	V	3*380	0.8-0.4
adjustment range	Kg/ h	O.8-0.4		O.4-4	1.6-8.1			1 4-20		6 — 30			8.5-42	8.5-84
maximum power	Kw	3	3	3	6	6	6	9.8	11.3	1 5	18.8	22.5	32	64
Water level electrode	individual	2	1	l	1	2	1	2	2	2	2	2	2	2*2
heating electrode	individual	3	3	2	3	3	2	3	3	6	6	6	6	6*2
Number of barrels	individual	1	l	1	1	1	1	1	l	1	1	l	1	2
Steam pipe ф 22/29	mm	l	l	l	1		1	1	1
Steam pipe ф 30/40	mm						l		1	1	1	1	2*2	2*2
Inlet hose 4/6	m	l	1	1	1	l	I	1	1	l	1	l	l	l
Installation volume (length * width * height)	mm	182*160*385			215*l82*500			340*232*523		385*405*705			385*405*705	770*405*705
Drainage pipe diameter	mm	22 ／ 28
control voltage	Proportional adjustment	Input signal: Current 4-20.0-20mA.: Voltage: DC0 ～ 10V
control form	Switching quantity	Switching signal (ON/OFF)
	ambient temperature	0 ～ 50 ℃
environmental condition	ambient water quality	Ordinary tap water Inlet conductivity 125-1250us/cm
	Water inlet pressure	0.1 — 0.5MPa
	ambient humidity	Less than 80% RH
	Humidification tank inlet valve, drain valve, humidification control board (proportional adjustment or switch quantity), bracket backboard, steam hose, upper and lower water pipes, water replenishment box, etc
Composition and Main Features	Angry to the point of poetry, occupying a small area for convenient use with various air conditioners
Characteristics of Functions	The humidification tank is made of high insulation material that is resistant to high temperature, high pressure, corrosion, non-toxic and odorless, ensuring safety and reliability. The tank body is welded using seamless pressing technology
	Provide proportional adjustment and switch control methods, suitable for control requirements of different standard signals
	Each OEM system unit can achieve a maximum humidification capacity of 100kg/h through different component combinations
	Electrode plates made of special materials with high lifespan and resistance to electrolytic corrosion.

Model designation instructions for Jinjiale electrode humidifier:



L: Continuous proportional withering

K： Open volume regulation
　　
15: 15Kg/h steam volume
　　
A: Including controller, sensor, hood, indoor direct steam humidification
　　
B: Including controller, sensor, fully automatic control, air conditioning unit, and air duct installation
　　
E: No controller, sensor, signal receiving operation, air conditioning unit, air duct installation
　　
C: OEM matching models include inlet and outlet valves, brackets, humidification tanks, inlet boxes, and control boards
　　
JD: Jinjiale electrode humidifier




Overview of JDA type electrode humidifier:

JDA humidifier with hood, indoor direct steam spraying humidification type. Adopting advanced computer control technology, the control system adopts high-quality LCD display SIMENS controller, ABB and other well-known electrical components to ensure the overall quality of the humidifier; Humanized product design concept, highlighting the ease of operation and convenient maintenance of the product; Easy to install, only need to connect the power supply, water inlet pipeline, and drainage pipeline to work, safe and automated. Suitable for various occasions that require direct indoor humidification, such as laboratories.


　　Configuration composition and characteristics:
　　
It consists of a chassis, a hood, a humidification tank, a controller, sensors, and electrical control components.
　　
The precision inlet filtration device automatically filters impurities in the water. Prevent the water inlet valve from being blocked by impurities.
　　
High quality humidity sensor, accurately detects changes in environmental humidity and adjusts the humidification ratio in a timely manner.
　　
Alarm protection (switch control board does not have this function). When the system malfunctions, an alarm signal is issued to prompt maintenance personnel to carry out repairs to ensure the normal operation of the humidifier. And it has automatic protection function for high water level alarm.
　　
High lifespan humidification tank, automatically adjusts the drainage cycle according to changes in the concentration of conductive medium in the humidification tank, cleans the humidification tank automatically, and extends the service life of the humidification tank. Electrode plates made of special materials with high lifespan and resistance to electrolytic corrosion.
　　
Manual drainage function, convenient for users to maintain and manage the system.
　　
LCD display SlMENS intelligent control system, programmable, user-friendly operation interface, can adjust humidification parameters arbitrarily. Intelligent control can achieve automatic operation. High control accuracy, continuous proportional adjustment control accuracy can reach+2%. Humidification efficiency is 100%, with a humidity control range of 20-100% RH. There are two control methods: switch quantity or proportional adjustment.

External dimensions and technical parameters of JDA humidifier（For mobile access, please click here）：

Electrode model	JDA 8L (K)	JDA 8L (K)
Humidification capacity (Kg/h)	4 ～ 8	13 ～ 15
Humidification power (Kw)	3 ～ 6	9.8 ～ l1.25
Humidification current (A)	4.5 ～ 9	14.8 ～ l7
Rated voltage (V)	220V ， 50Hz or 380V, 50Hz	380V ， 50Hz
Steam outlet	Spray the hood directly indoors, be careful of burns!
Dimensions (length * width * height)	400*290*668
L-type is a continuous proportional adjustment. K-type is a switch quantity adjustment

Overview of JDB humidifier:

JDB series electrode humidifiers are used in conjunction with modular air conditioners, fresh air units, and ventilation ducts. Humidified steam is transported to air handling units or ducts through steam distribution spray bars or rapid absorption steam distributors. Wall mounted or floor standing installation, only need to connect the power supply, water inlet pipeline, drainage pipeline, steam distributor (user selection) to work, suitable for clean and sterile humidification requirements in larger spaces.


　　Configuration composition and characteristics:

1. It consists of a chassis, a 0EM system, a control board (0N/0FF or proportional adjustment), a SIMENS LCD controller, sensors, AC contactors, air switches, transformers, and electrical control parts.
　　
2. The precision inlet filtration device automatically filters impurities in the water. Prevent the water inlet valve from being blocked by impurities.
　　
3. High quality humidity sensor, accurately detects changes in environmental humidity and adjusts the humidification ratio in a timely manner.
　　
4. Alarm protection (switch control board does not have this function). When the system malfunctions, an alarm signal is issued to prompt maintenance personnel to carry out repairs to ensure the normal operation of the humidifier. And it has automatic protection function for high water level alarm.
　　
5. High lifespan humidification tank, automatically adjusts the drainage cycle according to changes in the concentration of conductive medium in the humidification tank, cleans the humidification tank automatically, and extends the service life of the humidification tank. Electrode plates made of special materials with high lifespan and resistance to electrolytic corrosion.
　　
6. Manual drainage function, convenient for users to maintain and manage the system.
　　
7. LCD display SIEMENS intelligent control system, programmable, user-friendly operation surface, can adjust humidification parameters arbitrarily. Intelligent control can achieve automatic operation. High control accuracy, continuous proportional adjustment control accuracy can reach ± 2%. Humidification efficiency is 100%, with a humidity control range of 20-100% RH. There are two control methods: switch quantity or proportional adjustment.
　　
8. Modular combination, matched according to usage requirements.

　　External dimensions and technical parameters of JDB and JDE humidifiers（For mobile access, please click here）：

Electrode model		JDB(E) 4L (K)	JDB(E) 8L （ K ）	JDB(E) 15L (K)	JDB(E) 30L (K)	JDB(E) 42L (K)	JDB(E) 60 （ K ）	JDB(E) 84L (K)	JDB(E) 120L (K)
Humidification capacity (Kg/h)		4	8	15	30	42	60	84	120
Humidification power Kw		3	6	11.25	22.5	33.75	45	63	90
Humidification current A		4.5	9	17	34	48	69	96	137
External dimensions (Length * Width * Height)		400*290*580		450*340*660		600*420*800	980*420*800	1370*420*800
Module combination		Single machine with one module					Multi module OEM
rated voltage		Three phase AC380V, 50/60Hz
control	proportion	Voltage input DC: 0-1V~1OV current input: 4-20mA standard proportional adjustment signal
signal	switch	ON/OFF AC24V. Ac220V switch signal
Type I is continuous proportional adjustment, K-type is a switch quantity adjustment

JDE Motor Humidifier Series:

The JDE series electrode humidifier has no controller or humidity sensor. The user must provide humidity control signals or switch signals such as DC0-10V or 4-20mA for control before it can work. It is also used in conjunction with modular air conditioners, fresh air units, and ventilation ducts to humidify through air ducts and duct systems. Humidified steam is transported to air handling units or ducts through spray bars or rapid absorption steam distributors. Easy to install, wall mounted or floor mounted. Simply connect the power supply, water inlet pipeline, drainage pipeline, and steam distributor (optional for users) to work, suitable for clean and sterile humidification requirements in larger spaces. The specific parameters are as shown in the table above.




Product accessories:





Product application industry:





Product usage case:

Installation precautions:

1. The operating environment temperature is between 5-40 ℃;
　　
2. The relative humidity of the usage environment is below 80% RH;
　　
3. The slope between the installation surface and the vertical surface shall not exceed ± 5 degrees;
　　
4. The quality of the incoming water should be ordinary tap water, and the hardness of the water should not be too high;
　　
5. The water supply pressure is 0.1-0.5 MPa;




Installation site diagram: