The juicer is suitable forTea Restaurant、coffee shop、Western style restaurant、Beverage shop、Chinese Restaurant、Leisure food factory、fruit-and-vegetable processing factory、Ice cream series industry, ice fruit shop, bakery, restaurant, large hotel, seasoning food factory, juice and jam food factory、Vegetable and agricultural product processing plants, food processing and other places,Fluid food production, high-speed stirring and homogenization of liquids, both applicable.This machine is made up ofMade of 304 stainless steel, imported industrial motors, and special blade design, with excellent juicing effect. Function:Ice and sand; Juice extraction of fruits and vegetables, malt sprouts; Fluid food production; Stir and homogenize seasonings——Chili sauce, garlic sauce, etc.Stainless steel knives are sharp, have strong crushing force, and are sturdy and durable.3. Complete quickly in 2 minutes. Easy to pour and clean.

Structural composition

The whole machine is made of stainless steel and mainly consists of a stainless steel cylinder body, imported blades, Taiwanese motors, tilting devices, etc.

Working principle

The working principle of a juicer is to use the high-speed rotation of a rotating knife net at several thousand revolutions per minute to crush fruits and produce fluids, food liquids, etc., and stir and homogenize them at high speed,Homework completed, tilting type, easy to operate, industrial motor,Easy to operate and durable.

product name	productmodel	External dimensions
juicer	HYTW-910	630*630*1150MM
production capacity	power	volume
600-800KG/H	2.25KW/380V	30L
Machine weight
55kg

install 1. After unpacking, transport the machine to a spacious and stable working position. 2. Check if the machine has been damaged during transportation. 3. Check if all parts of the machine move flexibly and if there are any foreign objects in the material bucket. 4. Plug in the 380V phase power supply. 5. Press the ON button next to the machine to start processing.

Operation begins 1. Pour the material to be crushed into the material bucket (note: the material should not be too much, and the bucket needs to be mixed with water before operation.) 2. When the machine completes its work and presses the OFF button, the machine immediately stops running. 3. When pouring the material, unscrew the screws on the side of the machine body to tilt and pour out the material. Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

1. The machine should be placed in a stable and spacious place for operation.

2. Do not insert your hands into the machine while it is in operation.

3. After using the machine, please make sure to cut off the power before operating it

clean.

4. Be careful not to store too much food crumbs in the centrifugal filter and clean them in a timely manner

Otherwise, it is easy to cause vibration.

5. After each use of the machine, it should be carefully cleaned to keep the inside and outside of the juicer clean.

6. When cleaning the machine, do not use a faucet to directly rinse the bottom base of the juicer,

Never put the body in water to avoid damaging the insulation of the electrical components.

7. Food should not be too large, thick, or hard to be fed into the machine to avoid damaging the cutting blade

And cause motor overload.

8. A small amount of water must be added to crush the material.