The KBF1200-HAF hydrogen atmosphere furnace uses Swedish Kantar resistance wire as the heating element, adopts a double-layer shell structure and a 30 segment program temperature control system, with phase-shifting triggering and thyristor control. The furnace is made of alumina polycrystalline fiber material, and the double-layer furnace shell is equipped with an air cooling system to quickly raise and lower the temperature. The shell is sealed as a whole, and the cover plate is sealed with silicon

The cement and furnace door are made of silicone pads and equipped with a water cooling system. The gas enters and exits the rear chamber through a flow meter. There are multiple furnace inlet and outlet ports with combustion nozzles, which can be pre evacuated and can pass gases such as hydrogen, argon, nitrogen, oxygen, carbon monoxide, ammonia decomposition gas, etc. The furnace has a balanced temperature field, low surface temperature, and fast temperature rise and fall

With advantages such as high efficiency and energy saving, it is an ideal product for atmosphere protection sintering and atmosphere restoration in universities, research institutes, and industrial and mining enterprises.

(1) The surface temperature can reach up to 1420 ℃

(2) The surface is stainless steel color (very bright, to be noted when identifying by customers), will not rust, and will not fall off slag no matter how long it is used.

(3) Good resistance balance and temperature field balance

(4) Heating element: Kanthal A1 imported resistance wire from Sweden (resistance wire can be guaranteed for 2 years)

When the circuit experiences overcurrent or leakage, the circuit will automatically disconnect

The furnace is equipped with communication interfaces and software, which can directly control various parameters of the furnace through a computer, and observe the PV and SV temperature values and instrument operation on the furnace from the computer. The actual heating curve of the furnace will be drawn in real time by the computer, and the temperature data at each moment can be saved, and the vacuum degree can be adjusted at any time.

(1) High quality high-purity alumina polycrystalline fiber solidification furnace formed by vacuum suction filtration.

(2) Adopting Japanese technology for molding.

(3) The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated through thermal software

(4) Using 4-week heating, the temperature field is more balanced

(All imported electrical appliances certified by UL)