*Capable of 0~10V, 4~20mA mV、 Pulse signal, thermistor, thermocouple and other signals

*Display industrial parameter values such as temperature, humidity, pressure, flow rate, speed, weight, liquid level, counting, etc

*The display adopts high brightness red LED, with LED sizes including 1.8 ''2.3 '', 3.0’’4.0’’5.0’’8.0’’10.0’’(inch)

*Using aluminum alloy profile shell, not completely sealed, can only be used indoors

*Wiring is done using aviation plugs

*Channel identification, quantity unit identification, using adhesive method

*Optional relay alarm output, RS485 communication output, and analog transmission output

*Optional built-in clock with an annual error of less than 2 minutes, capable of displaying year, month, day, hour, minute, second, week, etc

*The external dimensions are related to the number of channels and LEDs, as well as the requirements for size, function, and unit identification of engineering quantities

*Related to length, width dimensions and display content, LED height, engineering units, etc

*Chassis: For LED height below 203.2mm (8 inches) (including 8 inches), the thickness is generally 60mm, and the chassis material is made of aluminum alloy and silver gray

Color,The display surface is made of organic glass

For LED heights exceeding 203.2mm (8 inches), the thickness is generally 120mm, and a steel chassis is used, usually with a black plastic surface. The display surface is

Organic glass

*A mounting bracket must be made for the installation of the large screen, and its strength should ensure that the installation of the large screen is firm, reliable, and safe. The positioning board on the large screen is only used as a large screen during installation

Positioning. Cannot be used as a load-bearing carrier and cannot be installed in places with direct sunlight

*The wiring and function of the measurement input are related, please refer to the accompanying instructions for details

*The power supply for the large screen is 3-wire, and the grounding terminal must be connected to the ground, otherwise there will be induced voltage on the chassis