VIP member
Product details
Japan KYOWA weighing sensor/load sensor
| Product images | Model name | summary |
|---|---|---|
 |
LMA-A Small compression load sensingimplement |
Small and lightweight compression load sensor. Rated capacity: 5N~1kN Diameter: 12mm (5-50N), 20mm (100N-1kN) Nonlinear: ± 1% RO or less |
 |
LMB-A Small compression load sensor |
Ultra small compression load sensor. Rated capacity: 10N~2kN Diameter: 10mm (10-200N), 16mm (500N-2kN) Nonlinear: ± 0.5% RO or below |
 |
LMBT-A Small compression load sensor |
Ultra small compression load sensors can be used at temperatures up to 100 ℃. Rated capacity: 50N~2kN Diameter: 10mm (50-200N), 16mm (500N-2kN) Nonlinear: ± 0.3% RO or below |
 |
LMR-S-SA2 Small compression load sensor |
Small and lightweight compression load sensor. Rated capacity: 2-20kN Diameter: 21mm Nonlinear: ± 1% RO or less (20kN is ± 2% RO or less) |
 |
LMC-A Small compression load sensor |
Small and lightweight compression load sensor. Rated capacity: 5-50kN Diameter: 12 ± 0.1mm (5kN, 10kN), 16 ± 0.1mm (20kN), 22 ± 0.2mm (50kN) Nonlinear: ± 0.5% RO or less (20kN, 50kN is ± 1% RO or less) |
 |
LCN-A Small compression load sensor |
Small and lightweight stainless steel compression load sensor. The internal structure is sealed with inert gas, highlighting its excellent stability and reliability. Rated capacity: 500N~20kN Diameter: 50mm Nonlinear: ± 0.15% RO or below |
 |
LCX-A-ID Small compression load sensor |
The host is a thin compression type load sensor made of stainless steel. Rated capacity: 500N~20kN Diameter: 28mm (500N-2kN), 43mm (5-20kN) Nonlinear: ± 0.1% RO or below |
 |
LC-V Small compression load sensor |
Small and lightweight strain gauge load sensors, easy to install on existing equipment. The sealed structure of the internal inert gas can highlight its excellent stability and reliability. Rated capacity: 50-200kN Diameter: 68mm (50kN), 78mm (100kN), 98mm (200kN) Nonlinear: ± 0.05% RO or below |
 |
LCV-A Small compression load sensor |
A small compression type load sensor with high capacity and inert gas sealed structure can be easily installed on already set equipment. Rated capacity: 500kN, 1MN Diameter: 126mm (500kN), 146mm (1MN) Nonlinear: ± 0.1% RO or below |
 |
LCR-G-SA2 Small compression type large capacity load sensor |
Small and lightweight compression load sensor. Rated capacity: 10-50kN Diameter: 20mm (10-30kN), 25mm (50kN) Nonlinear: ± 1% RO or less Small outer diameter, the cable is led out from below and can be placed in a cylindrical object for use. |
 |
LC-E Compression type load sensor |
Compression type load sensor. Rated capacity: 2, 5MN Diameter: 210mm (2MN), 240mm (5MN) Nonlinear: ± 0.5% RO or below |
 |
LC-FH High temperature compression load sensor |
A high-temperature compression load sensor that can be continuously used at a high temperature of 150 ℃ without external cooling. Rated capacity: 500N~200kN Diameter: 68mm (500N~20kN), 96mm (50kN), 116mm (100kN), 156mm (200kN) Nonlinear: ± 0.5% RO or below |
 |
LCK-A Thin compression load sensor |
Lowering the height for ease of use as a detection end for weighing systems is a compression type load sensor with excellent accuracy, reliability, stability, and responsiveness. Rated capacity: 5-200kN Diameter: 78mm (5-20kN), 98mm (50kN), 108mm (100kN), 118mm (200kN) Nonlinear: ± 0.2% RO or less (200kN is ± 0.5% RO or less) |
 |
LCH-F High precision compression load sensor |
High precision compression load sensors with nonlinearity of ± 0.02% RO or less. The highest accuracy is achieved in corrosion-resistant load sensors, which can be used in high humidity environments. Rated capacity: 100, 200kN Diameter: 156mm (100kN), 176mm (200kN) |
 |
LCS-D Explosion proof compression load sensor |
Pressure resistant and explosion-proof compression load sensor. |
 |
LC-J Corrosion resistant compression load sensor |
Corrosion resistant all stainless steel compression load sensor. Rated capacity: 5-200kN Diameter: 100mm (5-50kN), 120mm (100, 200kN) Nonlinear: ± 0.5% RO or below |
 |
LCW-C-SA3 Gasket type load sensor |
Thin gasket type load sensor. Rated capacity: 10-300kN Diameter: 80-188mm (same capacity, may vary depending on model) Nonlinear: ± 1% RO or less |
 |
LCW-D-S Gasket type load sensor |
A flat load sensor with high stability, environmental resistance, and cable outlet accessories. Rated capacity: 1-5MN Diameter: 241mm (1MN), 355mm (2-5MN) Nonlinear: ± 1% RO or less |
 |
LCW-E-S Gasket type load sensor |
A flat washer type load sensor with high stability and environmental resistance. Rated capacity: 1-5MN Diameter: 241mm (1MN), 355mm (2-5MN) Nonlinear: ± 1% RO or less |
 |
LCTS-B Stainless steel load sensor |
Made entirely of stainless steel, this compression type load sensor is used for measuring hoppers and containers. Thin "and" integrated upper and lower fixed plate "structure, easy to install on the support legs of the material bucket and storage tank. Rated capacity: 5-100kN Length: 175mm (5-30kN), 200mm (50-100kN) Nonlinear: ± 0.05% RO or below |
 |
LCTA-A Thin load sensor |
Thin load sensors with superior impact and vibration resistance can be fixed using upper and lower mounting surfaces (rubber mounting blocks need to be selected). Can correspond to lateral loads of 20% or less of the rated load. Rated capacity: 500N~3kN Length: 150mm Nonlinear: ± 0.05% RO or below |
 |
LCTB-A Thin load sensor |
Thin load sensors with superior impact and vibration resistance can be fixed using upper and lower mounting surfaces (rubber mounting blocks need to be selected). Can correspond to lateral loads of 50% or less of the rated load. Rated capacity: 5-50kN Length: 200mm (5-20kN), 260mm (30,50kN) Nonlinear: ± 0.03% RO or below |
 |
LCTE-A Thin load sensor |
Thin load sensors with superior impact and vibration resistance can be fixed using upper and lower mounting surfaces (rubber mounting blocks need to be selected). Can correspond to lateral loads of 50% or less of the rated load. Rated capacity: 10-100kN Length: 148mm (10kN), 178mm (20,30kN), 198mm (50,100kN) Nonlinear: ± 0.05% RO (0.1% RO for 100kN) or below |
 |
LCTD-A Thin load sensor |
Thin load sensors with superior impact and vibration resistance can be fixed using upper and lower mounting surfaces (rubber mounting blocks need to be selected). Can correspond to lateral loads of 50% or less of the rated load. Rated capacity: 100-300kN Diameter: 260mm (100, 200kN), 300mm (300kN) Nonlinear: ± 0.03% RO or below |
 |
LTZ-A High precision tensile load sensor |
A small, lightweight, high-precision tensile load sensor with a tray balance structure. Rated capacity: 500N~50kN Diameter: 68mm (500N, 1kN), 78mm (2-10kN), 98mm (20kN), 120mm (50kN) Nonlinear: ± 0.03% RO or less (± 0.05% RO or less for 500KA or more) |
 |
LT-FH High temperature tensile load sensor |
It is a high-temperature load sensor that does not require external cooling and can be continuously used in a high-temperature environment of 150 ℃. Rated capacity: 500N~50kN Diameter: 68mm (500N~20kN), 96mm (50kN) Nonlinear: ± 0.5% RO or below |
 |
LT-FL Low temperature tensile load sensor |
Low temperature load sensors used in extremely low temperature environments of -196 ℃. Rated capacity: 500N~50kN Diameter: 68mm (500N~20kN), 96mm (50kN) Nonlinear: ± 0.5% RO or below |
 |
LUX-B-ID Small dual-purpose load sensor for tension and compression |
A small load sensor with a waterproof joint made of all stainless steel, suitable for both tension and compression. Can be modified into products with cables that are resistant to repeated bending (bend resistant cables). Rated capacity: ± 50N to ± 20kN Diameter: 43mm Nonlinear: ± 0.1% RO or less (± 0.15% RO or less for 2kN or less) |
 |
LUR-A-SA1 Small dual-purpose load sensor for tension and compression |
A small and lightweight dual-purpose load sensor for tension and compression. Rated capacity: ± 50N to ± 2kN Diameter: 28mm Nonlinear: ± 0.5% RO or below Lag: ± 0.5% RO or below |
 |
LU-E Dual purpose load sensor for tension and compression |
The detection department is equipped with a dual-purpose load sensor that is sealed with inert gas for both tension and compression. Rated capacity: ± 500N to ± 200kN Diameter: 80mm (± 500N~± 2kN), 100mm（±5kN～±20kN）, 112mm（±50kN）, 138mm（±100kN）, 186mm（±200kN） Nonlinear: ± 0.2% RO or below |
 |
LUH-F High precision dual-purpose load sensor for tension and compression |
Ensure the stability of various characteristics by enclosing the interior with inert gas. Rated capacity: ± 500N to ± 200kN Diameter: 100mm (± 500N~± 5kN), 100mm（±10kN～±20kN）, 130mm（±50kN）, 160mm（±100kN）, 200mm（±200kN） Nonlinear: ± 0.02% RO or below |
 |
LUK-A Dual purpose load sensor for tension and compression |
Thin tension compression dual-purpose load sensor. It is most suitable for measurement in highly restricted areas or in fatigue tests with continuous and repeated loading. Rated capacity: ± 5kN to ± 2MN Diameter: 77mm (± 5 to ± 10kN), 107mm（±20kN）, 127mm（±50kN）, 157mm（±100kN）, 227mm（±200kN）, 307mm（±500kN）, 375mm（±1MN）, 560mm（±2MN） Nonlinear: ± 0.1% RO or less (± 0.2% RO or less for 500kN or more) |
 |
LU-A Low capacity tension compression dual-purpose small load sensorimplement |
Linear beam type low capacity dual-purpose load sensor for tension and compression. Rated capacity: ± 50N to ± 200N Diameter: 90mm Nonlinear: ± 0.3% RO or below |
 |
LVS-A Micro load sensor |
Can perform high-precision measurements, easy to install, and convenient to use. A sensor used to measure loads perpendicular to the installation surface. Rated capacity: 50mN~20N Nonlinear: ± 0.5% RO or below Lag: ± 0.5% RO or below |
 |
LTS-A Micro load sensor |
Can perform high-precision measurements, easy to install, and convenient to use. Used for measuring and installing horizontal loads on surfaces. Rated capacity: 500mN~20N Nonlinear: ± 0.5% RO or below Lag: ± 0.5% RO or below |
 |
LUB-B Beam type load sensor |
A beam type load sensor that can be used as a load detector for weighing systems. Products ranging from 1kN to 20kN are made of stainless steel. Rated capacity: 50N~20kN Diameter: 42mm (50N~2kN), 67mm (5,10kN), 84mm (20kN) Nonlinear: ± 0.03% RO or less (± 0.05% RO or less for 100KB or more) |
 |
LUB-C Beam type load sensor |
A beam type load sensor developed for OEM. Can serve as a load detector for weighing systems. Rated capacity: 5, 20kN Width: 38mm (5kN), 53mm (20kN) Nonlinear: ± 0.05% RO or below |
 |
LFM-A Small 6-component force sensor |
A washer type load sensor that can simultaneously measure the action forces (Fx, Fy, Fz) in the three orthogonal directions and the moments (Mx, My, Mz) around each axis. Rated capacity: 1, 3kN Diameter: 66mm Nonlinear: ± 0.5% RO or below |
 |
LFX-A Small 6-component force sensor with amplifier |
It can simultaneously measure the action forces (Fx, Fy, Fz) in the three orthogonal directions and the moments (Mx, My, Mz) around each axis, A 6-component force sensor with neutral wiring and built-in amplifier. Rated capacity: 1, 3kN Diameter: 66mm Nonlinear: ± 0.5% RO or below |
 |
LSM-B-SA1 3 component force sensor |
It is a component force sensor that uses strain gauges to measure forces in the three directions of X, Y, and Z. Rated capacity: ± 10 to ± 500N Diameter: 88mm Nonlinear: ± 0.5% RO or below |
 |
LUR-B-SA1 Load sensor for jack |
Load sensor used for load measurement of jacks. Rated capacity: ± 10kN to ± 2MN Length: 100mm (± 10kN), 110mm（±20kN）, 125mm（±30, ±50kN）, 175mm（±100kN）, 255mm（±200, ±300kN）, 330mm（±500kN）, 430mm（±1MN）, 530mm（±1.5MN）, 590mm（±2MN） Nonlinear: ± 0.2% RO or less (± 0.5% RO or less for 300kN or more) |
 |
LTA-C-S Load sensors for cranes |
As a detector for weighing devices such as cantilever cranes, it can also be used for measuring general tension. Rated capacity: 20-500kN Length: 410mm (20kN), 430mm (50kN), 470mm (100kN), 540mm (200kN), 610mm (300kN), 670mm (500kN) Nonlinear: ± 1% RO or less |
 |
LTR-S-SA1 Stretching type single-sided rotating load sensor |
It is a tensile single-sided rotating load sensor suitable for measuring rope tension and other parameters. Rated capacity: 20-50kN Length: 270mm Nonlinear: ± 0.5% RO or below |
 |
LTP-S-S Pin shaped load sensor |
Pin shaped load sensor for pulley shafts. Can be used to measure the suspension load of a crane. Rated capacity: 10~500kN Diameter: 50mm (10, 20kN), 55mm (50kN), 60mm (100kN), 70mm (200kN), 95mm (500kN) Nonlinear: ± 1-2% RO (according to specifications) |
 |
LCD-C Square load sensor |
Because it directly bears the load, the load loss caused by the device structure and other factors is minimal Rated capacity: 20-150kN Length: 360-450mm (different models with the same capacity may vary) Nonlinear: ± 0.2% RO or below |
 |
LCR-B-S7 Load sensor for tension meter |
A load sensor for tension meters with excellent environmental resistance. Suitable for load measurement in heat-resistant, oil resistant, corrosion-resistant, and high overload environments. Rated capacity: 5-100kN Diameter: 122mm (5-50kN), 208mm (100KN) Nonlinear: ± 0.1% RO or less (100kN is ± 0.2% RO or less) |
 |
BL-B Gasket type load gauge |
Suitable for load measurement of grounding piles, PC piles, and tunnel arch supports. This sensor is a high-precision waterproof structure that can be used on site. Rated capacity: 5-500kN Diameter: 98mm (5-50kN), 129mm (100kN), 90mm (200kN), 115mm (500kN) Nonlinear: ± 1% RO or less (5-100kN), ± 2% RO or less (200kN), ± 0.6% RO or less (500kN) |
 |
BL-E Gasket type load gauge |
Suitable for load measurement of grounding stakes, PC stakes, and tunnel arch supports. Rated capacity: 1, 2MN Diameter: 140mm (1MN), 210mm (2MN) Nonlinear: ± 0.5% RO or less (1MN), ± 1.5% RO or less (2MN) |
 |
BLD-A-S Gasket type load gauge |
This load gauge is suitable for measuring loads such as PC piles and locking bolts, and is designed to be lightweight and compact. Rated capacity: 50-500kN Diameter: 50mm (50kN), 61mm (100200kN), 64mm (500kN) Nonlinear: ± 1% RO or less |
 |
BLW-A Gasket type load gauge |
Best suited for on-site measurement Waterproof structure, thin and lightweight Rated capacity: 500kN~2MN Diameter: 188mm (500kN), 223.5mm (1MN), 263.5mm (1500kN, 2MN) Nonlinear: ± 0.8% RO or below |
 |
BLWL-B Gasket type load gauge |
Used to measure the tension of existing tension piles. This product was developed through a joint research conducted by the (independent) Civil Engineering Research Institute and 8 private companies on the development of a new type of pile load gauge that is easy to install and replace on existing piles. Load measurement, maintenance management, or measurement of loads applied to tunnel arch supports can be carried out for existing and newly installed grounding stakes, PC stakes, etc. |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-