A continuous mixer refers to a mixing method in which different materials are continuously input into the equipment according to a predetermined ratio, and the residence time of the materials in the cylinder is controlled by adjusting the speed of the conveying equipment, the speed of the mixer, and the discharge speed. Under the action of the stirring element, the ideal mixing effect is achieved while continuously discharging the materials.
There are four types of mixing components for this equipment: plow blade type, screw belt type, blade type, and double axis blade type. For materials that are prone to clumping and agglomeration, flying blades can be added. Different mixing components are selected according to the different characteristics of the materials. This device has the characteristics of material connection in and out, and high output. If users need to choose this type of equipment, they need to provide detailed material characteristics and production requirements to help our company make the correct selection.
Continuous mixers are particularly suitable for industries with high production requirements such as mineral powder, sludge treatment, and others.
|
A、 High speed
Continuous mixers are generally driven by gear reducers, and the motor uses a variable frequency motor to adjust the speed. The spindle speed is several times higher than that of an intermittent mixer to ensure the mixing effect. |
|
|
B、 Blender form one
Due to the different characteristics of the materials, different types of agitators are selected, such as blade type and screw type as shown in the picture. |
|
|
C、 Blender Form 2
Due to the different characteristics of the materials, different types of agitators are selected, such as the plow blade type and the double axis blade type shown in the picture. |
|
|
D、 Atomizing nozzle
An atomizing nozzle can be added above the flying knife to achieve liquid mixing. Due to the lower density of material aggregation under the cutting of the flying knife at this position, the atomized liquid material is more likely to enter and mix with the powder material. |
|
|
E、 Optional Flying Knife
For some special materials, a flying knife can be selected to play a role in depolymerization and dispersion. |
|
|
|
F、 feeding method
The feeding is generally carried out using a screw conveyor or belt conveyor, and a frequency converter is used to adjust the feeding speed to match the discharge speed of the mixer. |
|
