VIP member
LDP-B fluidized bed coating machine
LDP-B fluidized bed coating machine
Product details
OverviewDescription
Fluidized bed coating machine is a new type of particle coating equipment that organically combines fluidization coating technology and spray technology. It is widely used for film slow and controlled release, skeleton slow and controlled release capsules, pill coating, particle and powder coating.
Fluid-bed coater is a new style coating equipment that combined fluid-bed spraying technology and coating well. It is wide used for film slow and control releasing coating, framework slow and control releasing capsule, pellet coating, granule, powder coating, etc.
----------------------------------------------------------------------------------------------------------------
Equipment featuresFeatures of equipment
◎The bottom jet state is transformed, and the material has a strict running trajectory, thus obtaining uniform and continuous coating film.
◎Powder particles, pills to mask taste, moisture-proof, anti-oxidation, waterproof, heat-resistant, color isolation and other coatings.
◎No loss of coating materials and low production costs.
◎The route of fog particles to materials is short, so there is no danger of "spray drying".
◎Cylindrical acceleration container or inverted cone deceleration design, feasible for particle, large particle, small particle, and pellet coating.
◎The material has excellent dispersibility and no adhesion phenomenon.
◎Coating of bottom spraying, material flow in order. We can get uniform and continuous film.
◎Taste masking, odor, moistureproof, antioxidation, prevent water, heat insulation, coloration and separation coating.
◎Low productive cost, and the coating material is used perfect.
◎Short travel distance of fog granule and without the problem of 'spray drying'.
◎The design of cylinder for accelerator or cone for decelerate can Coating of granule, big granule and pellets.
◎The high separate, without adhere.
----------------------------------------------------------------------------------------------------------------
Technical parameters
|
Project Item/Specification |
3 |
5 |
15 |
30 |
60 |
90 |
120 |
200 |
300-1000 | ||
|
Capacity of feeding amount |
Kg/batch kg/batch |
3 |
5 |
10-20 |
25-40 |
40-80 |
50-90 |
80-120 |
150-200 |
Design according to user requirements |
|
|
Raw material container capacity Container volume |
L |
12 |
22 |
50 |
100 |
220 |
300 |
420 |
650 |
||
|
Wind turbine power of fan |
Kw |
4 |
4 |
7.5 |
7.5 |
15 |
18.5 |
18.5 |
22 |
||
|
Noise |
db |
The noise level of the fan isolation treatment is less than 75 decibels No more than 75db Separated of fan |
|||||||||
|
compressed air Compressed air |
Pressure |
Mpa |
0.6 |
||||||||
|
Consumption |
M3/min |
0.4 |
0.4 |
0.6 |
0.9 |
1.3 |
1.3 |
1.1 |
1.1 |
||
|
steam Steam |
Pressure |
Mpa |
0.4-0.6 |
||||||||
|
Consumption |
Kg/h |
|
|
64 |
85 |
181 |
210 |
250 |
330 |
||
|
Power of electric heater |
Kw |
9kw |
6kw |
Design by client according to user requirements |
|||||||
|
Host size Size of installation for reference |
H1(mm) |
|
|
2870 |
3150 |
3250 |
3400 |
3630 |
3890 |
||
|
H2(mm) |
2600 |
2600 |
3230 |
3620 |
3720 |
3870 |
4100 |
4360 |
|||
|
H3(mm) |
2410 |
2410 |
2545 |
2930 |
3020 |
3160 |
3390 |
3600 |
|||
|
B1(mm) |
770 |
960 |
1169 |
1460 |
1660 |
1760 |
2060 |
2260 |
|||
|
B2(mm) |
1170 |
1510 |
1860 |
2460 |
2860 |
1960 |
3660 |
4060 |
|||
|
L(mm) |
850 |
1000 |
1550 |
1700 |
1800 |
1800 |
2000 |
2100 |
|||
|
￠1 |
400 |
550 |
700 |
1000 |
1200 |
1300 |
1600 |
1800 |
|||
|
￠2 |
180 |
180 |
250 |
250 |
280 |
280 |
280 |
315 |
|||
All dimensions are for reference only and subject to material availability, our company reserves the right to make changes without prior notice.
*All sizes are used for reference only. According to the condition of material, our factory has the right change but not notice, pardon!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-