1． Fix the bracket（Turn one of the fixing screws on the bracket towards yourself）Installed on the connection below the protective cover of the viscosity meter ( Turn right to install and turn left to remove)

2． support0The rotor passes through the fixed position Bracket, 0 Number rotor The connector on top screw in The connecting screw on the viscometer; ( Turn left and install it,Rotate to the right to remove)

3． Fill the measuring cylinder with an appropriate amount ( about 30ml) After the measured liquid is loaded from below the fixed bracket to the bottom position, it is then fixed on the bracket with three screws, and carefully observed that the measured liquid level just exceeds the surface of the zero rotor cone;

4． Set the rotor number and rotor speed on the viscometer according to the requirements of the "Viscometer User Manual"（Suggest that the rotor speed should not be lower than 30 change / divide ）. The viscosity of the measured liquid can be measured.