LX-SR series foldable plate cooler (imported type):
Product Introduction: Suitable for chemical, mechanical, food, beverage, pharmaceutical, residential heating, hot water supply, air conditioning and other departments. Maximum assembly area: 40 m2 Maximum water treatment capacity: 160 m3/h Plate size: 885 × 384 mm.

1、 Design concept of plate cooler:
*The new design of the plate with pressurized flow guide zone uses multiple channels to increase pressure in areas where the flow velocity is high, so that the flow velocity in the entire plate is equal, greatly improving the heat transfer efficiency of the plate, reducing dead corners, and improving the scaling condition of the plate.
*The high-strength hanging mouth design of the board is to add pattern design at the hanging mouth, strengthen the rigidity around the flange, and assemble it more neatly and beautifully, with better opening performance.
*The design of the groove in the middle of the plate is sufficient to break off the continuous ripples inside the plate, and the half groove structure is added to the plate I, easing the pressure on the plate and making it more smooth and easy to bend after pressing.
*The interlocking design of the board is a special mechanical interlocking structure pressed at the four corners of the board, which improves the phenomenon of easy leakage during the assembly process of the board, making the assembly of the board more convenient and beautiful.
*All plate sealing gaskets adopt a non stick buckle form, reducing operation and maintenance costs and facilitating maintenance.

IIPlate coolerTechnical advantages and features:
*High heat transfer coefficient: The special corrugated design on the heat transfer plate can generate strong turbulence in the fluid at extremely low flow rates, and the self-cleaning effect of turbulence can prevent the generation of dirt, making the heat transfer coefficient of the plate heat exchanger 3-5 times that of the shell and tube heat exchanger.
*Economy: Under the premise of the same heat exchange capacity, compared with shell and tube type, it has less investment, lower operating costs, and lower maintenance costs.
*Adjustable: Simply increase or decrease the number of plates to meet the needs of process changes.
*Compact structure: occupying only 1/2 to 1/3 of the shell and tube type space under the same heat transfer capacity
*Easy to clean and repair

3、 Design and selection of plate cooler:
(1) The physical parameters of cold and hot media, such as acidity, chloride content, viscosity, density, thermal conductivity, specific heat, etc.
(2) The inlet and outlet temperatures of cold and hot media.
(3) The flow rate of cold and hot media or one of them.
(4) Requirements for pressure loss of cold and hot media.
(5) The inherent characteristics of plate coolers, such as plate materials, sealing gasket materials, etc.

4、 Introduction to manufacturers of plate coolers

The main products of Taizhou Mingwei Machinery Co., Ltd. are oil coolers, oil coolers, and air coolers,Plate coolerTube coolers, evaporator condensers, radiators, auxiliary heaters, heat exchangers, corrugated tubes, corrugated compensators, PTFE products, stainless steel non-standard coolers, metal hoses, PTFE hoses, corrugated expansion joints (compensators), etc. We also produce KL and FL type air coolers and all copper, aluminum, and stainless steel non-standard coolers using air (wind) as the cooling medium. Metal hoses have characteristics such as high and low temperature resistance, high pressure resistance, corrosion resistance, and fatigue resistance. The PTFE hose has advanced design, lightweight volume, reasonable structure, and easy loading and unloading. The oil cooler produced by our factory has undergone 2.5-3MPa pressure test and 400000 impact tests, and there is no leakage. All parts have undergone surface anti-corrosion treatment, especially the treatment of the inner wall of the shell, ensuring the cleanliness of the product and preventing the oil from being contaminated by rust, ensuring the normal operation of the system. Oil coolers are suitable for industries such as metallurgy, chemical, mining, light industry, and heavy industry.