Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

15226715191
Address

No.1 Puhui Street, Xihuan Road, Botou City, Hebei Province

Contact Now

Large pull rod transverse corrugated compensator

Puhui specializes in producing corrugated compensators and provides free installation solutions Serve customers with care Service hotline: 0317-829412

Contact Supplier

More Products

Product details

Large pull rod transverse corrugated compensator - expansion joint - corrugated pipe

Name: Large pull rod transverse corrugated compensator
Brand: Cangzhou Puhui Electromechanical Equipment Co., Ltd
Availability: InStock

Large pull rod transverse corrugated compensator

Purpose:

The large pull rod transverse corrugated compensator can compensate for the lateral and angular displacement of curved pipelines

Model:

Our factory produces DN100-DN5000 with pressure levels ranging from 0.1Mpa to 2.5Mpa

Connection method:1. Flange connection 2, connecting pipe connection

Horizontal compensation amount of product:According to user requirements

1、 Model example:

Example: 0.6DLB500-FB-1500 Indicating: The nominal diameter is 500mm, the working pressure is 0.6MPa, and the length is 1500mm. It is a large pull rod transverse corrugated compensator connected by stainless steel flange.

IILarge pull rod transverse corrugated compensatorInstructions for Use:
The large pull rod transverse corrugated compensator can compensate for the lateral and angular displacement of bent pipe sections.

3、 Calculation of the force exerted on the support by the large pull rod transverse corrugated compensator:
Lateral elasticity: Fy=Ky · Y Bending moment: M=Fy · L In the formula: Ky lateral stiffness N/mm Y actual lateral displacement (deformation) mm The distance m from the L-pipe rack to the midpoint of the compensator.

4Large pull rod transverse corrugated compensatorApplication example (without considering the correction of compensation amount and stiffness by temperature)
A certain carbon steel pipeline with a nominal diameter of 500mm, a working pressure of 0.6MPa, a medium temperature of 350 ℃, an ambient minimum temperature of -10 ℃, and a compensator installation temperature of 20 ℃. According to the pipeline layout (as shown in the figure), a large pull rod transverse compensator needs to be installed to compensate for the 160mm lateral displacement of the AB pipe section. The number of fatigue failures of the compensator is considered to be 15000 times, and the force on the support AC is calculated.

Solution: (1) According to the lateral displacement of AB pipe section Y=160mm， 0.6DLB500-FB-2000 can be selected for sample inspection, with a lateral compensation of Y0=193mm and a lateral stiffness of Ky=22N/mm
(2) Calculation of stress on supports A and C When calculating, consider "cold tightness" and the cold tightness can be taken as half of the actual compensation amount, which is 1/2Y.
FA=Ky·160/2=22×80=1760(N)　　 MA=FA×2=1760×2=3520（N·m） FB=Ky·160/2=22×80=1760(N)　　 MB=FB ×2=1760×2=3520（N·m） Namely: A and C supports respectively bear a thrust of 1760 Newton and a force distance of 3520 Newton meters.

Puhui specializes in producing corrugated compensators and provides free installation solutions Serve customers with care Service hotline: 0317-8294124.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content