TM3PF is an instrument for measuring air pressure and flow rate, which directly measures pressure and flow rate through the tested product.

Especially TM3PF-CV is used for check valves to measure the peak pressure reached before the valve opens, as well as the pressure and residual flow when the valve opens.

performance

Delta TM3PF - is a pneumatic module used for direct flow measurement in leak or flow testing.

This instrument directly measures pressure and flow rate through the tested products (filters, taps, valves, etc.). For small volume leakage or flow testing, a testing time of less than 1 second can be achieved. This is a test product for available misalignment pressure readings.

TM3F - CV is an instrument for measuring check valve pressure and air flow.

This instrument measures both the peak pressure reached before the valve is opened and the pressure and residual flow when the valve is opened. Before the test begins, the testing module checks the initial conditions for pressure and free output flow rate.

connect

TM3PF has a digital I/O interface for PLC connection, USB/RS485 programming and data acquisition interface, and is a software for collecting and managing test data for PCs.

This instrument can be connected and controlled by each PLC, and interfaces with HMI terminals that have serial lines, USB hosts, and Ethernet interfaces.

Software managers are allowed to collect and manage test data, set parameters, program, and perform SPC analysis on test data.

• Flow measurement: 160 l/min
  • Resolution: 0.01 cm3/min
• Full size compression to 10 bar
  • Resolution: up to 0.1 Pa
• Measurement unit: cm3/min; Cubic centimeters per hour
• Up to 300 test tables
• Digital I/O interface for PLC connection
• USB/RS485 for programming and data acquisition
• HMI operation terminal available: 4.3-inch color touch screen, comes with free software, can handle up to 8 TM3 modules.
• HMI fully interfacable: USB serial cable RS485/232- Ethernet
• The software manager, who specializes in managing data storage and statistical processes for the TM3 module, is available.
• External automation and equipment control: Staubli connector - HMI terminal - vacuum generator - volume control valve - pressure regulator - printer, barcode and QR code reader.