be applied to:Density testing of various high viscosity, suspension, emulsion, gel liquids such as chemical solutions, additives, suspensions, emulsions, dispersions, isomorphic solutions, mouthwashes, pharmaceuticals, etc.

Applicable to: flowing liquid, viscous liquid, volatile liquid, corrosive liquid, high-temperature liquid, suspended liquid, emulsified liquid alcohol, flux, essence, blood, sodium chloride, glycerin, electrolyte, diesel, refrigerant, hydrofluoric acid, glue, dichloromethane, etc. Similar liquids such as chemical solutions, modern energy, petroleum fuels, fine chemicals, chemical reagents, and chemical research laboratories can all be measured. Suitable for density measurement in fields such as quality management, formula formulation, cost control, and density research.

Principle:according toGB/T611-2006，GB/T11540-2008,GB1666-81,GB/T5009.2-2003,GB/T 5526-1985 ,JJG171-2004, GB/T13531、 T5526、T5009、、GB/T11540、GB/T12206、GB/T5518standard. Using Archimedes' principle buoyancy method and water displacement method to quickly read liquid density and concentration

Technical parameters:

characteristic:
1.Any solution can be quickly measuredOne step operation is convenient for achieving multiple consecutive rapid tests.

2. It has the function of density upper and lower limits, which can determine whether the specific gravity of the test substance is qualified or not. Equipped with buzzer device

3. Convenient sampling, the tested sample only needs to50CCDigital display, high measurement accuracy, easy operation, stable and durable.

4. The measuring cup is easy to clean, not limited by the small diameter of the specific gravity bottle, and can be reused. Disposable measuring cups can also be used.

5. IncludingRS-232CCommunication interface, convenient for connectionPCOptional printerXF-68 printer prints measurement data

6. Comes with a built-in battery,Configure windproof cover,More suitable for on-site testing

Liquid measurement steps:

1Place the hook on the measuring table and reset it to zero using ZERO

2.Put the labelThe accurate weight is hung ona hookWeigh the upper part,After stabilizationPressENTER key storage

3.Attach the weight to the hookPut it into the liquid to be tested,After stabilizationPressENTERKey storage,Display density value,Press MODE to display concentration

Standard attachments:①50ml beaker ② liquid testing platform ③ standard weight ④ hook ⑤ one power transformer ⑥ one instruction manual