Product Name |
Longmen CNC drilling and cutting integrated machine |
|
model |
JXCUT-3580GD-ST |
JXCUT -4012GD-ST |
JXCUT T-3580GD-SE |
JXCUT -4012GD-SE |
|
Motor type |
Dual drive 86 series stepper motor+reducer |
Dual drive Panasonic servo motor+reducer |
|
Effective cutting range of each mobile object X * Y |
2500*6000mm |
3000*10000mm |
2500*6000mm |
3000*10000mm |
|
Custom Information |
The length of the guide rail (effective cutting length Y-axis) can be extended or shortened according to user requirements |
|
Track spacing |
3500mm |
4000mm |
3500mm |
4000mm |
|
Length of guide rail |
8000mm |
12000mm |
8000mm |
12000mm |
|
Number of moving objects |
Single mobile unit |
Single mobile unit |
|
Torch height adjustment type |
Flame capacitance adjustment: optional/plasma arc voltage adjustment: optional |
|
A mobile device can only support one type of height adjustment (i.e., if plasma arc voltage adjustment is selected, flame capacitor adjustment cannot be added) |
|
Maximum number of cutting torches |
2 sets |
2 sets |
|
|
Configurable cutting torch method
(Plasma P: Flame: F)
|
D+P / D+F / D+P+F |
D+P / D+F / D+P+F |
|
running speed |
0-4000mm/minute |
0-10000mm/minute |
|
INPUT VOLTAGE |
Single phase AC 220V+three-phase AC 380V |
Single phase AC 220V+three-phase AC 380V |
|
Input power |
Single phase 2200W+three-phase 550-750W+plasma power supply |
|
Cut Type |
Plasma cutting (requires plasma power supply)/flame cutting |
|
Drive |
Gear rack drive |
|
|
Torch lifting
Journey (Z)
|
≤150mm |
|
Z-axis lifting speed (Z) |
20-2000mm |
|
Drilling Z-axis working speed (Z) |
20-200mm/minute |
|
Drill bit rotation speed |
480/730/1200 revolutions per minute |
|
Bit size |
Diameter ≤ 16mm |
|
Drilling thickness |
2-40mm |
|
Drilling positioning accuracy |
± 0.2mm/m |
|
Operational accuracy |
± 0.2mm/m |
|
Flame cutting thickness |
Perforation ability: 5-60mm edge cutting: 5 - 120mm |
|
|
Plasma cutting thickness |
Depending on the cutting capability of the plasma power supply provided |
|
Flame Cutting
automatic ignition device |
If the flame cutting configuration is selected, it comes with this device |
|
Gas supply requirements |
The maximum acetylene or propane pressure shall not exceed 0.1Mpa |
|
Oxygen supply requirements |
The maximum oxygen pressure shall not exceed 0.8Mpa |
|
Cutting material table and infrastructure |
We will provide cutting table drawings for users to refer to.
The infrastructure (H-beam or I-beam) and material platform must be purchased and installed by the user themselves. |
|
