CHARACTERISTICS

1、 High precision and excellent performance, specifically designed for low turbidity water quality monitoring

2、 Intelligent control interface-Redefine the controller

3、 Optimize and simplify management

4、 Innovative low maintenance design

5、 Compliant with international standards and specifications

2、 Technical parameters

1、 Range:0.0001 - 100 NTU

2、 Accuracy: Reading accuracy±2%（0-10NTU）

Reading of±4%（>10NTU）

3Scattered light:PTV 1000 IR (ISO)：< 0.005 / 5 mNTU

PTV 1000 WL (EPA*)：<0.015 / 15 mNTU

PTV 2000 RL (EPA*)：<0.008 / 8 mNTU

4Detection limit:PTV 1000：<0.0005 NTU

PTV 2000：<0.0001 NTU

5Sensitivity:PTV 1000: Better than0.005 NTU

PTV 2000: Better than0.001 NTU

6resolving power:0.0001 NTU (Depending on the range interval)perhaps5Digit display

7repeatabilityaccurateAccuracy: superior to1% at 1 NTU

8Initial response:10%Change:15 Second（@Upper limitFlow rate)

9Signal averaging: User selectable:1，3，6，10，30，60 and 90Second, default is30 second

10Sample temperature:0 to 50°C (32 to 122°F)Upper limit sample temperature:70°C (158°F)

11Sample flow rate:30 to 500 ml/Minutes, ideal flow rate:50-80 ml/minute

12Operating pressure: Atmospheric pressure

13environment/Operating temperature range:5 to 50°C (41 to 122°F)

14environment/Operating humidity range:5 to 95% (No condensation)

15Storage or transportation temperature:-40 to 60°C (-40 to 140°F)

16Power requirements:90 to 264 VAC，50/60 Hz.

17Sample injection connection:1/4inchNPTMother's head,¼-Inch pressure joint pipe

18Sample outlet(drain outlet)connect:3/8inchNPTMother's head, inverted hook pipe for water hose

19Inlet pipeline:¼-inchOD or 6 mm OD

20Water outlet pipeline:⅜-inchOD or 9 mm OD

21Drain connection of water flow module: quick connection

22Analog output measurement module: single output, optional0-20 mAperhaps4-20 mAProgrammable across the full range

23Analog output power communication module: single output, optional0-20 mAperhaps4-20 mA, full quantity

Programmable within the scope of the program

24Alarm function: Three set point alarms, each equipped withSPDTRelay, passive contact, rated

Constant Current5Aresistance load230 VAC

25Digital protocol options:Modbus，Profibus，Ethernet

26Protection type: Fiber reinforced polyester

27Protection level: Power communication module:IP 66

Measurement module:IP 65

28Compliant with standards:PTV 1000 IR (ISO)：ISO 7027

PTV 1000 WL (EPA)：US EPA

PTV 2000 RL (EPA)：US EPA

29Emission level:Class A：EN 61326，CISPR 11，FCC Part 15，Canadian Interference-Causing Equipment Regulation ICES-003

30Hardware installation:

①Turbidity meter sensor-The installation clamp can be directly installed on a vertical surface or fixed on the installation back plate (optional)

②Power communication module-Can be directly installed on a vertical surface or fixed on the mounting backplate (optional)

31Size:13.17 x 6.24 x 13.4inch(L x W x H)

32、PTVCommunication module with power supply:334.5 x 158.5 x 340.4 mm (L x W x H)

33Transportation weight:< 5 kg (11pound)

34Calibration method: Single point calibration, which can use any officially regulated and approved Fumalazine turbidity labeling solution

35Verification method: Standard liquid verification or dry solid verification material verification.