MAPtest 3050It is one of the most advanced products in its class, controlled by a microprocessor controller, with a stainless steel desktop housing, and designed as an instrument that can be operated by all types of personnel.

The operation is very simple. Easy to use and simple operation are two key design requirements for this type of analyzer. Whether in the laboratory or in the factory, operationMAPtest 3050No special skills are required, and everyone can obtain accurate test results perfectly.

Advanced sensors detect the content of carbon dioxide and oxygen in the sample gas, and the microprocessor analyzes the output from the sensors and displays the detection results within five seconds.

Due to the use of highly stable sensors,MAPtest 3050It can perform automatic verification. Perform the initial verification after preheating, and automatically perform subsequent verifications at certain time intervals. The automatic verification process can also be manually triggered. No need to verify the gas.

MAPtest 3050Use a backlit four line display screen to show the percentage content of oxygen, carbon dioxide, and remaining nitrogen, as well as pass/fail information (if the limit setting value is activated). If the oxygen content is below 10%, the accuracy can reach 0.01%, which can be used to detect residual oxygen content very accurately.

User programmable four limit settings are used to check whether the detection results pass, and each setting can be easily selected as needed.

MAPtest 3050It can store 1000 test results (concentration, time, date) and can be downloaded to a computer using optional software. All mainstream spreadsheet software can read this data for analysis, printing, etc.

You can choose an external fast printer to print out test results for different dates and times. The operator can turn on and off the printing and storage functions.

MAPtest 3050There is a sampling probe and an internal pump to extract sample gas from the packaging. This probe is suitable for one handed operation, and the pump can be set to suction 5-90 milliliters of sample gas. Alternatively, a manual needle can be used to inject sample gas into the instrument through a septum. When using this sampling method, the instrument automatically detects the flow rate of the sample gas and automatically analyzes it five seconds after sending the sample gas.

followMAPtest 3050Provide a complete set of sampling accessories and consumables.

MAPtest 3050Technical Parameter

display

4Row backlightLCD

Data Storage

1000Test results (optional)MAPlogSoftware downloads data to computer

range

The ranges of oxygen, carbon dioxide, and nitrogen are all0～100%

MAPtest 3050accuracy

Oxygen: ± of reading2%perhaps0.5%-Take the small ones

Carbon dioxide: ± range of measurement1%

Nitrogen:CO₂andO₂The and

response speed

Five seconds after sampling is completed

Sample volume

Minimum amount:5ml; Optimal amount:20ml

Maximum pumping capacity:90ml

MAPtest 3050output

SerialRS232interface

Optional printer

24Regular paper desktop printer

ambient temperature

-5～+40℃

power supply

110/120Vperhaps220/240V、50/60Hz, maximum power consumption100VA.

MAPtest 3050Size and approximate weight

325mmWidth x280mmDeep x135mmHigh;6.5kg