The MD-S700C series pressure switch is a pressure switch that causes micro switch action due to pure mechanical deformation. When force is applied to the pressure sensing component, it deforms and moves upward. Through mechanical structures such as railing springs, the micro switch at the upper end is activated to output electrical signals.
The MD-S700C series pressure switch is made of stainless steel metal shell and pressure sensing film. Its characteristics are easy to use, stable operation, and long mechanical life. Users can set control points through the accessory tools provided with the product, or request our factory to pre-set pressure control points at the factory.
The MD-S700C series products are widely used, especially suitable for pressure control and protection of automation equipment, mining machinery and other application machinery.
☆Mechanical switch, no power supply required, easy to use
☆There are normally open and normally closed contacts
☆Adjustable pressure alarm point
☆Suitable for occasions with explosion-proof requirements
Set pressure 0.2... 400Bar (MD-S700)
Silver plating on electrical contacts
Setting method: Hexagonal screw wrench
Set the delay diaphragm type to about 10% and the piston type to about 15%
Peak travel time of 90 times per second
Working temperature -20 ℃~80 ℃
Mechanical lifespan of 1000000 cycles
Protection level IP65
Explosion proof grade D П CT4
Weighing 200g
Peak electrical characteristic load:; 250V3A 125V5A
Variable switch logic normally open and normally closed
Power protection according to DIN 40050 standard
Power connection according to DIN 43650 standard
Reverse polarity and short circuit protection for wiring protection
Installation interface G1/4 G1/2 or customized by the user
Material: Stainless steel (threaded joint), cast aluminum (2088 shell)
Standard configuration: Product user manual, product certificate of conformity, hexagonal adjustable wrench on the outer packaging box