VIP member
MEWS-II SF6 Intelligent Micro Water Meter
Dew point measurement range: -60 ℃ to+20 ℃ Measurement time: (+20 ℃) 3 minutes; ※ The built-in rechargeable battery has a charging time of over 20 hou
Product details
◆
MEWS-II SF6 intelligent micro water meter is a modern, high-level, and intelligent measuring instrument developed by our company. The instrument is progressiveness than similar instruments in terms of measuring principle, automation degree and ease of use, especially adopting European standard technology to ensure accurate and reliable data.
MEWS-II SF6 intelligent micro water tester has a wide measurement range, fast response time, short measurement cycle, intuitive display, and easy operation. This instrument is suitable for a wide range of fields, including humidity measurement of air, nitrogen, inert gases, and any gas that does not contain corrosive media. It is particularly suitable for humidity measurement of SF6 gas and can be used by departments such as power, petrochemicals, metallurgy, environmental protection, and research institutes, with extremely high cost-effectiveness.
The MEWS-II SF6 intelligent micro water measuring instrument (dew point meter) adopts an original imported humidity sensor as the humidity sensitive component. When trace amounts of moisture in the measured gas enter the sensor sampling chamber, water vapor is adsorbed into the micropores of the sensor, causing a change in its capacitance. The sensor amplifies and converts this change into a standard linear electrical signal, which is processed by a microprocessor and then displayed on a liquid crystal screen.
◆ Product features of intelligent micro water meter
1. Portable design: The instrument is lighter, easy to carry and use.
2. Fast measurement: After the instrument is turned on, there is no need to wait, it can measure immediately and quickly obtain the humidity value.
3. Fast gas saving: The gas consumption during measurement is only about 2L (101.2kPa).
4. Self locking joint: using German imported self-locking head, safe and reliable, no air leakage.
5. Data storage: Designed with a large capacity, it can store up to 50 sets of test data.
6. Clear display: The LCD screen directly displays dew point, micro water (ppm), ambient temperature, ambient humidity, time and date, battery level, and other content.
7. Built in power supply: Equipped with a 4Ah rechargeable lithium battery, it can work continuously for 10 hours on a single charge.
SF6 intelligent micro water meter
Product FeaturesMEWS-II SF6 intelligent micro water meter is a modern, high-level, and intelligent measuring instrument developed by our company. The instrument is progressiveness than similar instruments in terms of measuring principle, automation degree and ease of use, especially adopting European standard technology to ensure accurate and reliable data.
MEWS-II SF6 intelligent micro water tester has a wide measurement range, fast response time, short measurement cycle, intuitive display, and easy operation. This instrument is suitable for a wide range of fields, including humidity measurement of air, nitrogen, inert gases, and any gas that does not contain corrosive media. It is particularly suitable for humidity measurement of SF6 gas and can be used by departments such as power, petrochemicals, metallurgy, environmental protection, and research institutes, with extremely high cost-effectiveness.
The MEWS-II SF6 intelligent micro water measuring instrument (dew point meter) adopts an original imported humidity sensor as the humidity sensitive component. When trace amounts of moisture in the measured gas enter the sensor sampling chamber, water vapor is adsorbed into the micropores of the sensor, causing a change in its capacitance. The sensor amplifies and converts this change into a standard linear electrical signal, which is processed by a microprocessor and then displayed on a liquid crystal screen.
◆ Product features of intelligent micro water meter
1. Portable design: The instrument is lighter, easy to carry and use.
2. Fast measurement: After the instrument is turned on, there is no need to wait, it can measure immediately and quickly obtain the humidity value.
3. Fast gas saving: The gas consumption during measurement is only about 2L (101.2kPa).
4. Self locking joint: using German imported self-locking head, safe and reliable, no air leakage.
5. Data storage: Designed with a large capacity, it can store up to 50 sets of test data.
6. Clear display: The LCD screen directly displays dew point, micro water (ppm), ambient temperature, ambient humidity, time and date, battery level, and other content.
7. Built in power supply: Equipped with a 4Ah rechargeable lithium battery, it can work continuously for 10 hours on a single charge.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-