Product Introduction
The negative pressure device compressor pump is modified based on the introduction of foreign centrifugal pump technology and combined with the company's years of production experience. The sealing adopts a negative pressure device: the bearing seal is located at the pump suction port, which belongs to a negative pressure environment. Therefore, when the pump is running, the atmospheric pressure is higher than the pressure at the bearing, which can effectively ensure the sealing performance of the pump and achieve basically no leakage at the bearing. Adopting axial inlet and radial outlet methods, the impeller adopts a semi open design with a wide flow channel, which is not easily blocked when conveying slurry containing particles, and is resistant to crystallization and particles. Adopting a long bracket structure and non rigid connection method. The axial force generated during jumping operation is partially borne by the bearings of the pump bearing box, reducing the axial force borne by the motor and extending the service life of the motor and pump.
This product is widely applicable to liquids such as acids, bases, salts, oils, food and beverages, alcoholic beverages, organic solvents, etc., especially suitable for transporting highly corrosive liquids containing fine particles. Operating temperature:- 20℃～80℃

Structure and Materials

Model Meaning

50-MFY15-30-I 50 Indicating that the inlet diameter of the pump is50 mm MFY Indicating wear-resistant and corrosion-resistant pump 15 Indicates that the traffic is15 m³/h 30 Indicating that the head is30m I Indicate the number of impeller stages as1level

Model and Parameters