Zhengzhou Weisheng Electronic Technology Co., Ltd
Home>Products>MIPEX-02 series infrared gas sensor
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    186-9582-0325
  • Address
    299 Jinsuo Road, Zhengzhou High tech Development Zone, Henan Province
Contact Now
MIPEX-02 series infrared gas sensor
MIPEX-02 series infrared gas sensor
Product details
product details

MIPEX-02 IR gas sensor

Used for detecting methane/hydrocarbons/carbon dioxide

With over 15 years of design and manufacturing experience, we are proud to announce that we have created an excellent product - MIPEX infrared gas sensor. The MIPEX series sensors have revolutionized the combustible gas market.

The MIPEX-02 sensor based on optical technology consumes an average of less than 5mW, which brings new significance to the design of cutting-edge products for detecting hydrocarbons and carbon dioxide. Using MIPEX sensors in your device can make your ideas come true.

MIPEX-02 is a second-generation MIPEX infrared gas sensor with NDIR working principle. The sensor includes LEDs with optimized spectral and signal processing algorithms, optical systems, specially designed photodiodes, embedded temperature sensors, and electronic devices for signal processing. Provide communication with instrument electronic devices through a digital UART interface.

The MIPEX-02 sensor is an experimentally proven sensor that has been used in portable and fixed combustible gas detectors, suitable for mining and above ground applications. Now you have a core part that you can completely rely on.

Sensor characteristics

• Ultra low power consumption - less than 5 mW

• Wide measurement range up to 100% vol methane

• Performance meets CSA requirements (optional)

• Less affected by humidity - almost no reaction under non condensing conditions up to 98% humidity

• Maintain long-term stability and easy calibration

Internally includes a microcontroller and a digital UART interface

• Tolerant to "toxic" gases in catalytic sensors

The highest level of intrinsic safety explosion-proof "ia"

• No sintering

Main applications

Selected products for mining and above ground applications;

Applicable to all fields of industrial safety;

Including chemical and petrochemical industries;

Electricity/utilities/water/wastewater;

Oil and gas extraction&refineries;

Mining/fire/hazardous materials;

Biogas, etc;

TECHNICAL INDEX

General
Gas sampling method diffuse
Working principle NDIR
Detect gas CH4
CH4 (reduces cross interference with ethane)
Calibrate CnHm to C3H8
CO2
working conditions
relative humidity Up to 98%
atmospheric pressure 80~120Kpa
temperature -10 to+40 ° C (Group I)
-40 to+60 ° C (Group II)
Overall size Φ 20x16.6mm (without pins)
weight Stainless steel (standard) -16.6g
Stainless Steel (Quick Version) -15.5g
Polycarbonate -5.5g
MTBF (Mean Time Between Failures) 10 Years
Detection parameters
measuring range Maximum 100% VOL CH4; 100%LEL CnHm
accuracy ± 0.1% vol. or 5% reading value CH4
± 3% LEL. or ± 5% reading value C3H8
Response time T90 <10s (Quick Version)
<30s
Electrical parameters
Working power supply voltage 3.0V~5.0V DC
output signal Numbers, UART
power consumption <5mV
Warm-up time No more than 1 minute

Note: Product parameters are subject to change without prior notice
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!