VIP member
MOEN-536 SF6 Gas Infrared Leak Detection Imaging Instrument
※ Detector type: Quantum Well Infrared Detector (QWIP); ※ Wavelength: 9.1~11 μ m, center wavelength 10.55 μ m; ※ Field of view angle/smaller focal len
Product details
◆
The SF6 gas infrared leak detector is an optical gas imaging (OGI) device that uses long wave infrared cooling detectors and precision narrowband filtering technology. It has extremely high detection sensitivity and can be used for leak detection of about 20 gases such as sulfur hexafluoride, ethylene, ammonia, etc.
Statistical data shows that gas leakage accidents also comply with the 80/20 principle, with 80% of the leakage caused by 20% of the leakage points. The SF6 gas infrared leak detection imaging device adopts a video image leak detection method. Users can intuitively observe gas leaks through the display screen, accurately locate the leak location, and the detection process will not affect the normal operation of the tested equipment. Its long-distance, non-contact detection method greatly improves the efficiency of leak detection, thereby significantly reducing the probability of major accidents. It is an essential tool for detecting equipment operation status, ensuring safety production, and preventing air pollution.
Characteristics of SF6 gas infrared leak detection imaging instrument
Quantum well infrared detector (QWIP) with a resolution of 320 * 256 pixels, NETD≤15mK， The frame rate is 60Hz. The center wavelength is 10.55 μ m, perfectly matching the SF6 absorbance spectrum;
Equipped with a 5-megapixel visible light camera and high-power dual flash, infrared and visible light image data coexist. Efficiently identify historical fault locations;
5.7-inch high brightness LCD screen, clearly visible in sunlight; Built in LCOS viewfinder. The LCD screen and viewfinder angles can be adjusted to easily handle various detection scenarios;
Certification: Testing report from China Electric Power Research Institute; Protection level IP54.
Application fields of SF6 gas infrared leak detection imaging instrument
High voltage power grid;
Chemical enterprises such as ammonia and ethylene.
SF6 gas infrared leak detection imaging device can detect gases
Please refer to the table below for the VOC gases that can be observed on this machine. For gases not listed, please contact our company for consultation.
SF6 gas infrared leak detection imaging device
Product FeaturesThe SF6 gas infrared leak detector is an optical gas imaging (OGI) device that uses long wave infrared cooling detectors and precision narrowband filtering technology. It has extremely high detection sensitivity and can be used for leak detection of about 20 gases such as sulfur hexafluoride, ethylene, ammonia, etc.
Statistical data shows that gas leakage accidents also comply with the 80/20 principle, with 80% of the leakage caused by 20% of the leakage points. The SF6 gas infrared leak detection imaging device adopts a video image leak detection method. Users can intuitively observe gas leaks through the display screen, accurately locate the leak location, and the detection process will not affect the normal operation of the tested equipment. Its long-distance, non-contact detection method greatly improves the efficiency of leak detection, thereby significantly reducing the probability of major accidents. It is an essential tool for detecting equipment operation status, ensuring safety production, and preventing air pollution.
Characteristics of SF6 gas infrared leak detection imaging instrument
Quantum well infrared detector (QWIP) with a resolution of 320 * 256 pixels, NETD≤15mK， The frame rate is 60Hz. The center wavelength is 10.55 μ m, perfectly matching the SF6 absorbance spectrum;
Equipped with a 5-megapixel visible light camera and high-power dual flash, infrared and visible light image data coexist. Efficiently identify historical fault locations;
5.7-inch high brightness LCD screen, clearly visible in sunlight; Built in LCOS viewfinder. The LCD screen and viewfinder angles can be adjusted to easily handle various detection scenarios;
Certification: Testing report from China Electric Power Research Institute; Protection level IP54.
Application fields of SF6 gas infrared leak detection imaging instrument
High voltage power grid;
Chemical enterprises such as ammonia and ethylene.
SF6 gas infrared leak detection imaging device can detect gases
Please refer to the table below for the VOC gases that can be observed on this machine. For gases not listed, please contact our company for consultation.
|
Serial Number |
gas species |
Serial Number |
gas species |
|
1 |
ethyleneEthylene (C2H4) |
10 |
Methyl vinyl ketonemethyl vinyl ketone（C4H6O） |
|
2 |
propylenepropylene（C3H6） |
11 |
furanoxole（C4H4O） |
|
3 |
ACETYL CHLORIDEAcetyl chloride (C2H3ClO) |
12 |
Vinyl Ethervinyl ether (C4H6O) |
|
4 |
sf6sulfur hexafluoride (SF6) |
13 |
Allyl Bromide3-bromopropene（C3H5Br） |
|
5 |
acrylonitrile2-Propenenitrile（C3H3N） |
14 |
ammoniaDimethyl sulfide(NH3) |
|
6 |
Methyl silaneMethylsilane in cylinder（CH6Si） |
15 |
vinyl chloridevinyl chloride（C2H3Cl） |
|
7 |
TRICHLOROETHYLENEtrichloroethylene（C2HCl3） |
16 |
acetic acidAceticAcid (C2H4O2) |
|
8 |
Allyl chlorideAllyl chloride（C3H5Cl） |
17 |
Allyl pentafluorobenzeneBenzene, pentafluoro-2-propenyl- (C9H5F5) |
|
9 |
acrolein2-Propenal (C3H4O) |
|
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-