【 Working Principle 】

The airflow crusher, cyclone separator, dust collector, and induced draft fan form a complete crushing system. After being filtered and dried, compressed air is sprayed into the crushing chamber at high speed through a Laval nozzle. At the intersection of multiple high-pressure airflows, the material is repeatedly collided, rubbed, and sheared to be crushed. The crushed material moves to the classification zone with the upward airflow under the suction force of the fan. Under the strong centrifugal force generated by the high-speed rotating classification turbine, the coarse and fine materials are separated. The fine particles that meet the particle size requirements are collected by the cyclone separator and dust collector through the classification wheel, and the coarse particles continue to be crushed in the crushing zone.
[Performance Characteristics]
Ceramic parts or rubber lining are used for the parts in contact with the material to prevent contact between the material and metal, ensuring the purity of the material!
Suitable for dry crushing of various materials with a Mohs hardness below 9, especially for crushing materials with high hardness, high purity, and high added value.

The product particle size D97 can be adjusted between 2-150 microns, with good particle shape and narrow particle size distribution.

Low temperature media free crushing, especially suitable for the crushing of heat sensitive, low melting point, sugar containing, and volatile materials.

The crushing process relies on the collision between the materials themselves, which is different from mechanical crushing that relies on the impact of blades or hammers on the materials. Therefore, the equipment is wear-resistant and the product purity is high.

Can be used in series with multi-stage classifiers to produce products of multiple particle sizes at once.

The equipment is easy to disassemble and clean, with smooth inner walls and no dead corners.

The entire system is sealed and crushed, with less dust and low noise, and the production process is clean and environmentally friendly.

The control system adopts program control, which is easy to operate.
[Technical Parameters]