Heating method: The heating plate is placed underneath to heat the instrument evenly, without energy loss. The air cooling effect is better. (Different from other manufacturers)

MX-106 typeMicrocrystalline glass digesterThe use of glass burr reflux pipes instead of spherical reflux pipes, and the use of air cooling technology instead of tap water reflux cooling, with static water assisting cooling at the end of the condenser pipe, can not only save water and standardize the instrument, but also improve the safety of instrument use.
　　
The chemical solution preparation, operation, and COD calculation of the instrument fully comply with GB11914-89. COD water samples below 50mg/L can be improved by diluting titrants and oxidants, while COD water samples above 700mg/L can be determined by diluting the water sample proportionally.
　　
　　MX-106 typeMicrocrystalline glass digesterTechnical indicators:
　　
Measurement range: 10-700mg/L, diluted water samples greater than 700mg/L are measured.
　　
Dissolving time: 10 minutes -2 hours and 30 minutes (users can choose their own heating time)
　　
Measurement error: Potassium hydrogen phthalate standard solution (500mg/L), relative standard deviation not exceeding 5.0%
　　
Industrial organic wastewater (500mg/L), with a relative standard deviation not exceeding 8.0%
　　
Environmental temperature: ≤ 35℃
　　
Dissolve 8 samples (using a 250mL conical flask with a 24 # grinding mouth)
　　
Heating power: ≤ 1600W (AC220V, 50H, users can choose their own heating power)
　　
　　MX-106 typePerformance characteristics:
　　
The wavy strip heating wire of the flat electric furnace plate is made of a new type of rare earth alloy material, which has an extremely long service life. The surface of the electric furnace plate is covered with a glass panel that can withstand high temperatures up to 800 ℃. When heated, the surface of the electric furnace heats up evenly, and the heating and cooling rates are fast.
　　
The electric furnace plate uses a new type of high-temperature resistant inorganic environmentally friendly insulation material, which has low heat loss in the bottom plate and surrounding areas, uniform heating and thermal conductivity, and higher thermal efficiency.
　　
Flat electric furnace plate with heat-resistant glass panel that is flat, smooth, and easy to clean; If the surface is contaminated, simply wipe it dry with a cloth to reduce damage to the instrument caused by improper operation.
　　
The improved glass burr reflux tube and heat dissipation system ensure the parallelism and accuracy of the sample digestion results due to its excellent digestion reflux effect.
　　
Corresponding to different heating powers selected by the user, the surface heating temperature of the electric furnace can be displayed.
　　
The digestion time can be set. After digestion is completed, the instrument automatically stops heating, and the instrument fan continues to work for half an hour to assist in sample cooling. It can be left unattended.
　　
Energy and water conservation, safety and reliability have improved the work efficiency of operators.
　　
　　MX-106 typeFollowing the basic principles of ISO and GB11914-89 standards, the digestion operation with reflux heating and micro boiling for 2 hours is ensured. The preparation and addition of reagent solutions are consistent with the national standard method, ensuring reliable analysis results.
　　
　　MX-106 typeBy using microcomputer technology for timed control of the heating electric furnace, 8 250ML conical digestion reflux devices can be heated simultaneously. Eight digestion cone reflux devices can be heated simultaneously to achieve energy-saving, reduce power load, and improve efficiency.