Product model:Digital display standard typeFET

Equipment configuration: Magnetic stirrer host 1tower

Standard mixer 1One (specification:Ф8*10mm）

Main performance characteristics

1、LCDDisplay interface, real-time viewing of speed and monitoring of working status;

2The brushless DC motor operates quietly, requires no maintenance, and is safe and explosion-proof;

3Automatic storage function, the data used by the staff can be automatically saved each time, and to avoid erroneous storage operations, the confirmation of various parameter settings is limited and the work runs smoothly10The automatic storage protection function will only be available after seconds;

4、CPUUsing imported original industrial grade chips,32Bit processors that can adapt to industrial environments with high electromagnetic interference;

5The strong magnetic magnet inside the equipment effectively prevents the agitator from escaping;

6The whole machine is designed to withstand high temperatures and corrosion, with a heating temperature of up to340The stainless steel disk surface is beautiful, resistant to high temperatures and chemical corrosion, and the aluminum alloy shell has good heat dissipation performance. The sprayed surface is resistant to chemical corrosion.

Technical parameters:

precautions
1. When the stirrer jumps or does not stir during stirring, please cut off the power and check whether the bottom of the beaker is flat and the position is correct. At the same time, measure whether the current voltage is between 220V ± 5V;
2. The running time should generally not be too long, intermittent use can prolong the service life, and no heating is required when not stirring.
3. Medium speed operation can work continuously for 72 hours, high-speed operation can work continuously for 48 hours, and prevent severe vibration during operation;
4. Electricity: The power socket should use a three hole safety socket and must be properly grounded;
5. The instrument should be kept clean and dry. It is strictly prohibited for the solution to flow into the machine to avoid damaging it. The power should be cut off when it is not working.