Product Features

The WM3000B closed flash point tester is designed and manufactured according to the requirements specified in the Chinese standard GB/T 261 "Determination of Flash Point - Closed Cup Method". It is suitable for determining the closed flash point temperature of petroleum products such as diesel, kerosene, insulating oil, and fuel oil using the methods specified in this standard.

This instrument is designed with advanced technology, easy operation, reliable performance, and accurate test results. It is an ideal substitute for similar imported instruments and can be widely used in railway, aviation, power, petroleum industries, as well as universities, research institutes, metrology and testing departments for the detection and testing of flash points and ignition points of petroleum products.

Technical Parameters

1. Working power supply: AC220V ± 10%, 50Hz

2. Temperature measurement: room temperature~360 ℃;

3. Repeatability: ≤ 2℃；

4. Reproducibility: ≤ 2℃；

5. Accuracy: 0.5%;

6. Heating rate: in accordance with GB/T 261 standard;

7. Mixing speed: 105 revolutions per minute

8. Ignition method: electronic ignition, gas flame 3mm~4mm;

9. Environmental temperature: (10~40)℃；

10. Relative humidity: ≤ 80%；

11. Power consumption of the whole machine: not exceeding 1000W.

12. Optional thermometer: rod type mercury thermometer, in accordance with the requirements of GB/T 261-2008 standard.

⑴ Temperature range -5~110 ℃, with a division of 0.5 ℃.

⑵ Temperature range of 20-150 ℃, with a division of 1.0 ℃.

The temperature range is 90-370 ℃, with a division of 2 ℃.

Configuration Checklist

Related product recommendations:WM3000 fully automatic closed flash point tester