Mechanical test load deflection tester for cement electric polesSpecification
Accuracy ≤ 1% (FS), reading ± 1 word
2. Force and displacement display, with the smallest unit being 0.01KN and 1mm
3. AC power supply~220V ± 15% (50Hz)
4. Automatic zeroing
5. Operating environment temperature: normal temperature
6. Use environment humidity of 40% -90% (no condensation)
7. Use without strong magnetic fields or noise sources around
No peak display
Measurement: Displacement measurement within 1800mm. (The smallest display is 1mm)
When the force display unit ① is ≤ 20KN, the reading is 0.01KN
② When ≤ 200KN, the reading is 0.1KN
Load display zeroing, displacement display zeroing, zeroing
Maximum Display Scale: 1999
Storage environment: Temperature:- 5℃～+45℃
Humidity: 40% to 90% (without condensation)
Volume: 290mm wide x 120mm high x 265mm deep (including bracket and largest size)

Standard configuration:
1. One display instrument and one power cord.
One 2.20KN and one 200KN tension sensor, two M36 suspension rings, two M24 suspension rings, and one 5-meter 4-core shielded signal wire.
One 3.1800mm displacement sensor, one sensor bracket, and one 5-meter 3-core shielded signal wire. One electronic stopwatch

Mechanical test load deflection tester for cement electric polesIt is an instrument used for measuring the load characteristics and displacement changes of electric poles in tension, compression, and displacement. It has a digital LCD display window that displays the load force value and displacement value respectively. The product meets the testing requirements for load, deflection, and displacement of cement rods in GB/T4623-2014 "Mechanical Test Methods for Circular Cement Products"; It also meets the one paper certification review requirements of State Grid and Southern Power Grid.