VIP member
Melt blown filter element
Melt blown filter cartridge is a tubular filter cartridge made of non-toxic and odorless polypropylene particles, which are heated, melted, spun, pull
Product details
The melt blown filter element is made of non-toxic and odorless materialspolypropylenegrainZi, a tubular filter element made by heating, melting, spinning, pulling, and forming If the main raw material is polypropylene It can be called PP melt blown filter element.
Not only for large-scale use in water purification It also has outstanding chemical compatibility and is suitable for filtering strong acids, strong bases, and organic solvents. Strong pollutant absorption capacity, long service life, and low cost.
Technical parameters:
Filtering accuracy: 1um, 3um, 10um, 20um, 30um, 60um, 100um
Use pH: 1-13
Maximum positive pressure difference 0.4Mpa
Working temperature: at 0.25Mpa, ＜ 70℃
Sterilization: Resistant to 126 ℃, 30 minutes of online steam sterilization.
Endotoxin: The water extract of the filtration column has an endotoxin content of less than 0.5EU/ml after 1AL testing
| Filtration | 0.5μm, 1μm, 3μm, 5μm, 10μm, 20μm | Water flow pressure difference characteristics (10 "filter element) |
| Filter cartridge length | 10", 20", 30", 40" | |
| Outer diameter of filter element | Φ65mm | |
| Inner diameter of filter element | Φ28mm | |
| Maximum operating temperature | 60 ℃ (at a pressure difference of 0.12MPa) | |
| maximum working pressure | 0.6MPa | |
| Positive voltage difference | 0.4MPa | |
| Reverse voltage difference | 0.1MPa | |
| Interface type | Flat press in type (can be connected to other interfaces) | |
| Can add end cap material | polypropylene |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-