Micro injection pump, animal micro administration injection pump, suitable for small animals such as rats, mice, rabbits, etc., can be used in conjunction with PE catheter; High precision, easy operation, reliable and durable, please call for consultation.

The main features of LSP injection pump are:

Equipped with syringe inner diameter input function: can select a syringe from the list or directly input the syringe inner diameter;
Human computer interface friendly: large screen LCD display, digital knobs combined with thin film buttons for easy and fast operation;
Working mode: Single push working mode;
Equipped with power-off memory function;

Traffic jam protection function: When the propulsion mechanism of the infusion pump is blocked during operation, the infusion pump will stop the operation of the propulsion mechanism and sound a horn alarm;
The 485 communication bus can be connected to the upper computer and controlled through backend software;
External control interface: equipped with input/output control function;
Liquid volume calibration function: More accurate flow can be obtained through the calibration program;
Syringe protection function: By adjusting the position of the limit block, the syringe can be prevented from being damaged;


The main technical specifications of LSP injection pump:
Precision injection pump SLP01-2A working mode: injection
Number of channels: 1
Maximum travel: 140mm
Travel resolution: 0.03125 μ m
Linear velocity range: 1 μ m/min-13mm/min (flow rate=linear velocity x cross-sectional area inside the syringe)
Linear speed adjustment resolution: 1 μ m/min
Travel control accuracy: Error ≤± 0.5% (when the travel is ≥ 30% of the maximum travel)
Rated linear thrust:> 90N
Syringe selection: Main manufacturers and models of syringes are available for selection
Syringe customization: can be directly input into the syringe
Flow calibration: Obtain more accurate liquid volume through calibration program
Operating parameter settings: dispensing volume, injection time, etc
Display parameter selection: liquid volume, flow rate, or linear velocity
Power off memory: After powering on again, you can choose whether to continue working according to the state before the power off
Status signal output: 2-channel OC gate signal output, used to indicate start/stop and direction status
Control signal input: 2-channel start stop control input terminal, 1-channel falling edge trigger signal control start stop; 1-channel TTL level signal controls start stop
Communication interface: RS485
Dimensions: 280 × 210 × 140 (mm)
Weight: 3.6kg
Using power supply: AC 90V-260V/15W
Working environment temperature: 0 ℃ -40 ℃
Relative humidity of working environment:< 80%

Multiple models to choose from:

Model: 810

Minimum clamping capacity of 5ml syringe;

Injection speed when using a 5ml syringe: 0.1-150ml/h, with increments of 0.1ml/h per level

Model: 810T type

Minimum clamping capacity of 5ml syringe;

Two channel configuration, two syringes can be individually set with switches and injection speeds;

The injection speed range when using a 5ml syringe is 0.1-150ml/h, with increments of 0.1ml/h per level

model: LSP-01

Single channel configuration;

Minimum clamping of 10 microliters syringe, minimum injection speed: 0.0002 μ m/min

model: LSP-02

Can hold 2 syringes simultaneously

Minimum clamping of 10 microliters syringe, minimum injection speed: 0.0002 μ m/min

model: LSP10

Can hold 10 syringes simultaneously

Minimum clamping of 10 microliters syringe, minimum injection speed: 0.0002 μ m/min

The Fusion 6000 high-pressure injection pump is designed to measure viscous solutions and semi-solid materials for injection under pressure with microfluidic pump precision.
It has the following unique features: 700 lb linear thrust, additional injector heater, additional pressure sensor, additional 4 injector holders, and packing bottom.

·Capable of withstanding high pressure;
·Equipped with heated injector function;
·Monitor and control the pressure inside the syringe;
·Modular design allows for an increase in the number of syringes to four and easy adjustment of the push block position;
·Adopting a full glass touch screen interface and heavy mechanical metal structure, it is resistant to chemical corrosion and easy to clean;
·Has high durability in the vast majority of laboratory and industrial environments;

model: Fusion 6000

Main features:

·Suitable for high-voltage applications
·Equipped with temperature and pressure control options
·Prime Buttons for easy adjustment of syringes
·Can hold 5mL to
·Flow rate from 0.0001 mL/min to 408 mL/min
·Controlled through touch screen, USB, RS232, TTL
·Including free programmable mode
·Free LABVIEW and MATLAB drivers

：，

：

yuyanbio

： yuyanbio