MiliboMilli-Q Direct8 Water Purification System

Producing pure water directly from tap water/The integrated system of ultrapure water adopts a series of purification technologies such as reverse osmosis (RO) to produce three-level pure water from tap water

ultrapure water

1Prograd pre-treatment column effectively extends the service life of RO membrane

2Through the waste water circulation loopThe reverse osmosis wastewater treated by Prograd is recycled to reduce the usage of tap water (with a maximum recovery rate of 66%) and extend the service life of Prograd, avoiding problems such as blockage and structural issues that may shorten the use of RO membranes.

3Unique temperature-Pressure feedback system adjusts the inlet pressure based on water temperature to avoid a decrease in water flow rate during winter when the tap water temperature drops

4Unique water quality safety monitoring device ensures only low ion concentrationRO permeate water enters the water tank to ensure the quality of pure water and extend the service life of ion exchange columns used for producing ultrapure water

5A comprehensive process monitoring system that uses validated detection instruments to check the water temperature, pressure, conductivity, and other critical control points in the processRO retention rate for ultrapure water

ultrapure water

1Through dedicatedJetpore ion exchange resin, artificial activated carbon, and 185/254mm dual wavelength ultraviolet lamp were used for the first step purification, resulting in a water resistivity of 18.2m and TOC below 5ppb

2The produced water enters the terminal purifier through a small cycle for final purification, further removing specific pollutants, which is crucial for specific experiments

Technical Parameter