The mixing tank consists of a mixing tank body, a mixing tank cover, a stirrer, a support, a transmission device, a shaft seal device, etc. Heating or cooling devices can also be configured according to process requirements. The materials used for the mixing tank body, mixing tank cover, mixer, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements. The mixing tank body and mixing tank cover can be connected by flange sealing or welding. The mixing tank body and mixing tank cover can be equipped with process pipe holes for feeding, discharging, observation, temperature measurement, pressure measurement, steam distillation, safety venting, etc. according to process requirements.

The upper part of the mixing tank cover is equipped with a transmission device (motor or reducer), which drives the mixer inside the mixing tank through the transmission shaft. The shaft seal device can adopt various forms such as machine seal, packing, labyrinth seal, etc. (determined according to user needs).

Overview: Mixing and stirring tanks, also known as water phase tanks, are widely used in industries such as coatings, pharmaceuticals, building materials, chemicals, pigments, resins, food, and scientific research. This device can be made of materials such as carbon steel and stainless steel according to the process requirements of the user's product, and equipped with heating and cooling devices to meet different process and production needs. The heating forms include jacket electric heating and coil heating. This equipment has a reasonable structural design, advanced technology, durability, and is characterized by simple operation and easy use. It is an ideal chemical equipment with low investment, fast production, and high returns.

The use and maintenance of the mixing tank: 1. This equipment is a normal pressure equipment. If the pipeline of the heat exchanger is unobstructed, it is also considered as normal pressure. If the pressure exceeds *, please check whether there is any blockage at the inlet and outlet. 2. The reducer should be equipped with 40 # -50 # engine oil or 70 # -90 # extreme pressure industrial gear oil. After 20 days of operation (8 hours per day), the engine oil should be replaced and the oil in the oil tank should be cleaned. Afterwards, the oil tank should be replaced and cleaned every 3-5 months. 3. If equipped with a condenser, it can be determined whether to clean the heat exchange pipeline based on the heat exchange effect (excluding those without a reducer). 4. The loading capacity inside the mixing tank should strictly follow the effective volume of the mixing tank, and overloading is strictly prohibited to avoid burning out the motor or damaging components such as the reducer. 5. If the equipment is not used for a long time, it should be completely cleaned, lubricating oil should be injected everywhere, and the power should be cut off.