The multifunctional fully automatic spreading machine is a newly developed product by our company for small processing households in hospitals and clinics. It inherits the traditional plaster application method and uses machines to replace manual labor. During the production process, there is no loss of edge material or plaster matrix, and traditional black plaster and pressure-sensitive adhesive plaster can be applied. Its characteristics are compact structure, light weight, small footprint, high degree of automation, and simple operation. The fully automatic plaster machine is equipped with a mixing tank, which can boil and mix plaster. The machine has a cutting device, which can directly produce finished plaster and apply various dosage forms of plaster. There is no need for manual participation in the production process, and it can be used daily10000 pieces.

This machine is a new type of fully computer-controlled system, with a high-speed dressing and automatic packaging production line. It adopts advanced technology at home and abroad, and the computer monitors the entire process of equipment operation.

This machine has the following advantages:;

1. High production speed;

Greatly replacing the low production efficiency and labor-intensive drawbacks of current dressing and pasting equipment. Dressing sticker high-speed rolling cutting machine, automatic packaging speed per minute50-100 pieces, with 100-250 pieces per minute of bare chips operated by only one person.

2. Overall equipment configuration;

This machine has Taiwan Dongyuan servo motor and Taiwan Yonghong servo motorPLC, 12 inch touch screen connection, Taiwan Futai photoelectric color code tracking system, to achieve packaging color code positioning. Other electrical appliances are Delixi Electric Appliances, software programming; Using advanced foreign technology and our company's long-term theoretical and practical experience to develop software programs. During equipment operation, the center position of the medicine belt product is automatically adjusted by combining automatic phase and front and rear positions. The rolling cutter is made of powder high-speed steel and is used for cutting. The appearance is stainless steel packaging, and the operation workbench is covered with an organic glass plate,

The total weight of the equipment is one ton, ensuring its stability during high-speed operation.

3. Equipment is changing specifications；

When replacing the adhesive tape specifications, the device only needs toAfter 30 minutes of tool installation, simply enter the required specifications on the computer to start normal production.

4. Auxiliary configuration;

Each raw material anti roll device adopts magnetic powder braking and magnetic powder clutch automatic constant tension control system to ensure the stability of the equipment during high-speed operation