brand	SAINT-GOBAINNorprene A-60-GIndustrial pipe
colour	black
temperature resistance	-50 to 74 degrees
hardness	55A
breathability	40
anti-uv	A： Very good, no impact
Anti ozone	B： Better, minor impact
Acid and alkali resistant	general
Pump tube lifespan	higher than1000hour
authentication	--
application	Ink and long-term peristaltic pump liquid transfer, can be used for various pads, wear-resistant sleeves, and insulated cables for a long time

remarks:
1. The higher the permeability value (for nitrogen testing), the better the permeability of the pipe, and vice versa

2. Pump tube life test conditions: Pump tube 17 (6.4 × 9.6 × 1.6), room temperature 23 degrees, using American Masterflex peristaltic pump and 3-roller Easy Load pump head, 600rpm speed, displacement back pressure 0psi, water medium, continuous and uninterrupted operation until the pump tube cracks (this value is provided by Saint Gobain for reference only)

Norprene A-60-G is an imported peristaltic pump tube that can be used as a peristaltic pump hose
The service life can reach 1000 hours
Selection of pressure and vacuum conditions for application
◆ Heat resistance, ozone resistance, acid and alkali resistance, anti-aging
◆ Heat sealed and weldable
◆ Has good fluidity and high dielectric constant
Black, opaque, with low permeability to oxygen, carbon dioxide, nitrogen, etc
Working temperature range -59 ℃~135 ℃
◆ Repeatable high temperature and high pressure disinfection

Jieheng Company's product engineers are always available to provide you with support in pump tube application and procurement, ensuring that you can use imported hoses well.

1. When transporting different liquids, the compatibility between the liquid and the hose needs to be considered. For details, please click on the reference:Chemical Compatibility Table
2. The lifespan requirements for hoses vary depending on the application scenario. For specific details, please click on the reference:Hose life table

Pump tube size parameters
Pipe No	13#	14#	16#	19#	25#	17#	18#
Wall thickness of hose mm	1.6mm (1/16 inch)
Inner diameter mm	0.8	1.6	3.2	2.4	4.8	6.4	7.9
Size of hose pagoda joint	1.6（1/16）	1.6（1/16）	3.2（1/8）	2.4（3/32）	4.8（3/16）	6.4（1/4）	7.9（3/8）
Continuous pressure a	1.7bar				1.4bar	1.0bar	0.7bar
Intermittent pressure a	2.7bar				2.4bar	1.4bar	1.0bar
Vacuum suction range	660mm Hg8.8 water					510mm Hg6.7m water

Pump tube size parameters
Pipe No	15#	24#	35#	36#	73#	82#	86#	88#	90#	92#
Wall thickness of hose mm	2.4mm (1/16 inch)				3.2 (1/8 inch)		6.3	4.8mm (3/16 inch)	6.3
Inner diameter mm	4.8	6.4	7.9	9.6	9.7	12.7	9.6	12.7	19	25.4
Size of hose pagoda joint	4.8（3/16）	6.4（1/4）	7.9（3/8）	9.6（3/8）	3/8	1/2		1/2		1
Continuous pressure a	1.7bar		1.4bar	1.0bar	0.17bar	0.2bar	0.25bar	0.14bar	0.25bar
Intermittent pressure a	2.7bar		2.4bar	1.4bar	0.27bar	0.27bar	0.3bar	0.14bar	0.3bar
Vacuum suction range	660mm Hg8.8m water			610mm Hg8.3m water

Small flow tube size parameters
Pipe No	1×1	2×1	2.4×0.8	3×1	4×1	1×1 Three card tube	2×1 Three card tube	3×1 Three card tube
Wall thickness of hose mm	1	1	0.8	1	1
Inner diameter mm	1	2	2.4	3	4
Continuous pressure a	0.1
Intermittent pressure a	0.1
material	Platinum vulcanized silicone rubber