Introduction to Large Explosion proof Dust Removal Equipment

Jieneng RuiThe FTJ series outdoor explosion-proof dust removal equipment is a widely used dust collector with flexible fan and filter ratio, suitable for central dust collection in various working conditions. The unit can be installed in parallel combination, with characteristics such as large air volume, small volume, and flexible layout. The whole machine is treated with spray coating, with a beautiful and corrosion-resistant appearance.

Adopting constant voltage variable frequency control, energy-saving and environmentally friendly.

Adopting explosion-proof motors, electrostatic filters, and explosion-proof solenoid valves.

Pulse trachea fully enclosed design.

Pressure difference alarm: When the filter is blocked and the pressure difference between the inside and outside exceeds 2.5KPa, the alarm light will sound (reminding to clean the filter or check the compressed air pressure), and the machine fan will continue to work.

When the temperature is ≥ 70 ℃, the dust collector will automatically sound an alarm and shut down.

Unloader malfunction, alarm device. When the unloader malfunctions, the panel indicator light will light up, the alarm light will sound, and the machine will stop

Work.

The dust explosion-proof motor is safer for the unloader.

The circuit is protected by explosion-proof rings and galvanized pipes.

■ The grounding wire of the host shell should be grounded 50cm into the ground.

Polyester fiber+PTFE high-efficiency filter element, with a large filtration area of 222m ²/278m ², can work for a long time without clogging.

Fan noise reduction treatment ensures low working noise.

PS2000 nine fold profile electrical cabinet, with high safety and easy operation.