1、 Introduction to Ozone Aeration Tower
Ozone mixing towerAlso known as ozone contact mixing tank,Ozone aeration towerOur factory specializes in producing ozone aeration towers. Its working principle: Ozone enters the bottom of the oxidation tower through a pipeline, passes through an aerator, and is then emitted through a microporous aeratorBubbles, during their ascent, fully dissolve ozone in water. Water is scattered from the top of the ozone tower and naturally flows away from the top of the ozone tower. Ensure sufficient mixing time between ozone and water. Make the sterilization effect more accurate, and the top is equipped with exhaust emissions and overflow ports to ensure that excess ozone does not remain indoors. Affects the production of staff. The overflow port ensures that when the water inside the mixing tower is full, the water will not flow back to the ozone generator and damage it.
2、 Working principle of ozone aeration tower

Ozone mixing tower, also known as oxidation tower,Ozone sterilizerIt is commonly used in water treatment systemsSterilization equipmentThe sterilization effect is not only related to the type and quantity of bacteria in the water and the content of ozone, but also to the contact time between ozone and water and the air distribution head of ozone. Generally speaking, the longer the contact time between ozone and water, the more thorough the mixing, and the better the sterilization effect of ozone. The smaller the air holes on the air distribution board, the smaller the ozone is cut into bubbles, and the larger the area of contact between ozone and water. Therefore, the mixing effect and sterilization effect are better.
3、 Advantages of Ozone Contact Tower

In order to ensure sufficient mixing area and mixing time between ozone and water, we need sufficient mixing space. Generally, the mixing time of ozone is5-10In minutes, we need to design the space of the ozone mixing tower based on the mixing time and flow rate. Once the space of the ozone mixing tower is determined, it is generally designed to allow for convective mixing of ozone and water components, with water entering and ozone entering from below. The distance between the inlet and the ozone inlet is designed to be3500mmAbove, in this way, ozone and water have sufficient mixing time and space to achieve the best sterilization effect.

Our company usually designs ozone mixing towers304Material and316Lmaterial2Made of medium stainless steel material, with air distribution plate selectedTitanium plate cloth gasPlate (titanium plate aeration disc),Titanium plate aeration discCloth pores are at 5-20umAperture, ozone can be fully cut into small bubbles, improving the sterilization effect of the ozone sterilizer.

Main uses of ozone mixing tower

1. Production of purified water, mineral water, mountain spring water, and beverage water

2. Sterilization and disinfection of vegetables, fruits, and meat products to reduce pesticide residues;

3. Sterilize, disinfect, and preserve mineral water, purified water, medical water, and tap water;

4. Sterilize and disinfect aquaculture water to prevent and control aquatic diseases;

5. Sterilize and decolorize sewage; Disinfection and purification of swimming pool water;

our companyTitanium plate cloth air plate(Titanium plate aeration disc)! It has the characteristics of small cutting bubbles and good mixing effect!
Ozone distribution plate in the ozone mixing tower
4、 Selection parameters for ozone aeration contact tower