Detailed information on PVC (polyvinyl chloride) density meter tester and plastic density meter YD-A300:

PVC (Polyvinyl Chloride) Density Tester Plastic Density Meter YD-A300 Function and Features:
1. Without any manual calculation, the density and specific gravity values of solid, granular, floating, and colloidal materials such as wire and cable materials, rubber blocks, plastic sheets, PVC/PP/PE plastic particles, EPS/polyurethane foam, silicone/asphalt adhesive, etc. can be accurately and quickly measured in 5 seconds in 2 steps;
2. It has the function of setting the temperature and density of the solution, and can be measured using distilled water or tap water as the medium;
3. Equipped with weighing calibration function to ensure the accuracy of density and specific gravity measurements;
4. Equipped with fully automatic zero point tracking and the ability to fully remove skin and weight throughout the process;
5. Adopting an integrated transparent measuring sink, the sink is molded with special materials that are not only wear-resistant and corrosion-resistant, but also not easily broken, which can greatly facilitate customer use;
6. Adopting a lightweight, thin strip, stainless steel suspension rail design can greatly reduce errors caused by the buoyancy of the suspension rail line;

PVC (Polyvinyl Chloride) Density Tester Plastic Density Meter YD-A300 Technical Parameters:
Warranty for three years
model: YD-A300
Weighing: 300g
Density accuracy: 0.001 g/cm3 (optional high-precision 0.0001g/cm3)
Density range: 0.001~99.999g/cm3
Measurement types: Non absorbent solids, pastes such as rubber, plastic, pearl cotton, alloys, powder metallurgy products, dense ceramics, magnetic material products, sealants, asphalt adhesives, gemstones, rocks, etc., PVC/PE/PP/ABS/PPS and other granular materials
Measurement principle: Archimedes' displacement principle
Measurement time: approximately 5 seconds
Measurement steps: 1. Place it on the measuring table and press the save button to memorize it; 2. On the hanging basket during water release, press the save button to directly display the density and volume
The results show: density, volume
Parameter settings: water temperature setting, medium liquid density setting
Correction method: One click automatic correction
Output mode: RS-232C standard communication interface, convenient for testing data output and printing
Power Supply: AC~220V / 50HZ

Standard accessories:
① One host
② A sink
③ One measuring table
④ One pair of tweezers
⑤ One dropper
⑥ One weight
⑦ A set of windproof and dustproof covers
⑧ One set of particle measuring accessories
⑨ One set of floating body accessories
⑩ One power transformer

after-sale service:
1. All products are original genuine products.
2. All products come with a three-year free warranty and lifetime maintenance. All expenses incurred during the warranty period will be borne by us. (Excluding natural disasters and man-made phenomena)
3. If any products are damaged during transportation, we will bear all responsibilities and guarantee to replace them with new ones within 4 days.
4. Regarding the usage and operation methods, we have the responsibility and obligation to teach the buyer's technical personnel until they are fully proficient.
5. For other detailed purchasing matters, refer to the contract terms agreed upon by both parties.

Our company is recruiting distributors and agents from various provinces and cities. There is no need to stock up, and we offer one-stop shipping services for consultation
Main instruments and equipment of the company:
Laboratory analytical instruments: electronic analytical balance, electronic density balance, desktop viscometer, portable viscometer, solid density meter/densitometer, liquid density meter/concentration meter, hardness tester, microscope, spectrophotometer, pH meter, turbidity meter, moisture meter, micrometer, caliper, oil content extractor, tap density meter, loose density meter, Hall flowmeter, powder flow rate meter, various electronic analytical balances and other laboratory analytical instruments.

Non destructive testing instrument series: coating thickness gauge, ultrasonic thickness gauge, ultrasonic flaw detector, gloss meter, whiteness meter, colorimeter, electric spark leak detector, roughness tester, and other non-destructive testing instruments.

Various testing equipment: melt flow rate tester, melt index meter, powder comprehensive characteristic tester, hot melt adhesive softening point tester, natural bulk density meter, and other testing equipment.