Irrigation pipes, also known as irrigation pipes, are made of PVC and polyvinyl chloride. Using PVC resin powder as the main raw material and adding appropriate additives, the product is processed and formed through processes such as mixing, extrusion, sizing, cutting, and expanding.

Product features:

1. The flow resistance is low, the roughness is 0.008-0.009, and the water transport capacity is 20% higher than that of cast iron pipes and 40% higher than that of concrete pipes.

2. High tensile strength, with a tensile strength of not less than 45MPA at 23 ℃.

3. Good compression resistance, will not break when compressed to 1/2 of the outer diameter, and has good mechanical properties.

4. Lightweight and easy to transport, the specific gravity of PVC-U pipes is only 1/5 of that of steel cast iron pipes and 1/2 of that of concrete. The weight of the pipes is about 1/4 of that of ductile iron pipes of the same specifications and length, and 1/10 of that of concrete. The transportation cost is reduced by 1/2-1/3.

5. The pipes are hygienic and non-toxic, with no secondary pollution or flow, and will not cause secondary pollution to water quality; The service life of irrigation pipes under stable temperature and pressure shall not be less than 50 years.

Product Usage:

Irrigation pipes are widely used in urban and rural indoor and outdoor water supply, rural water improvement, farmland irrigation, salt and alkali industry brine pipelines, aquaculture water supply, mine ventilation, water supply and drainage, landscaping and sprinkler irrigation, and other large and small projects.