There are many patterns of PVC buckle strips, generally including V-shaped, U-shaped, L-shaped, T-shaped, drip type and other types. PVC buckle strips can be printed on the surface, that is, hot pressed. The principle is to use specialized equipment to cover the surface before the product is extruded and water-cooled. The film can be adsorbed to the surface by the temperature of the product itself, and any color can be changed according to one's own requirements.
1. The drip shaped buckle produced by the PVC buckle production line has the characteristics of good breathability, less use of raw materials, light texture, and better toughness. The effect of using it for decoration is also very beautiful
2. PVC shell buckle is thicker and more durable than other types of clamps. It is mainly made of extruded PVC and is a single system. It looks monotonous in color without losing its beauty. PVC shell buckle is generally used for surface clamps of wire troughs, sinks, and other wire troughs.
3. PVC buckle strips also have a T-shaped buckle strip, which is generally used as a sealing strip between various types of decorative panels or wall panels. The advantage of this buckle strip is that it can be attached with a layer of decorative film on the surface, and the color or specification of the buckle strip can be selected according to the color of the wall material.
4. The traction machine for PVC with four buckles must be selected according to the extrusion quantity and specifications of the product. The corresponding corner can only drive the corresponding line. Due to the small overall size and fast production speed of PVC buckle products, it is essential to adapt to the corresponding traction machine!
5. Generally speaking, once PVC is produced on the four button production line, a regular molding table does not require any good specifications. It is mainly based on the size of the button that the molding water film to be used is selected. If the molding tool used is different from the extrusion tool used earlier, the product cannot be produced. So the shaping water film must be matched with the extrusion tool. The longer the shaping table, the better the cooling effect, and the more regular the shape of the product produced!
6. The cutting machine and card board of the PVC four buckle production line must be matched with the product. It can be disassembled to produce different lines, and different cutting machine cards need to be replaced. The corresponding card board can better fix the lines, ensure better and more stable production, and ensure that the produced lines are of consistent length and straight in appearance