Our company produces pesticide mixing tanks, including tanks, impellers, bearing end caps, bolts, bearings, and gaskets; The two opposite sides of the tank body are respectively equipped with inlet and outlet holes, with the inlet hole set at the lower end of one side and the outlet hole set at the upper end of the other side; The impeller is horizontally set inside the tank body, and bearings are installed at both ends of the impeller shaft. The bearings are installed in the bearing end caps, which are fixedly connected to the tank body by bolts. A sealing gasket is provided between the bearing end caps and the tank body. When mixing pesticides in this pesticide mixing tank, the pesticide and water are evenly mixed without manual stirring, and there is no pesticide splashing, making it safe and environmentally friendly.

With the advancement of science and technology, many new technologies have been applied to agricultural production. In order to improve the quality of crop growth, prevent pests and diseases, pesticides are widely used in agricultural production. Traditional pesticide mixing is done manually, taking a certain amount of different pesticide types and placing them in a container for manual stirring. As is well known, pesticides are toxic substances and generally have an unpleasant odor. When mixed manually, prolonged contact with pesticides is harmful to the body, and manual mixing results in uneven drug mixing, which cannot achieve the best effect of pesticide use. In addition, modern agricultural production is often large-scale production, requiring a huge amount of pesticides to be prepared, and is not suitable for manual preparation. Given the aforementioned technical issues, it is essential to design a new type of pesticide mixing container.

The purpose of the mixing tank produced by our company is to solve the above problems and provide a safe, environmentally friendly, and more evenly mixed pesticide mixing tank.

Including the tank body, impeller, bearing end cover, bolts, bearings, and sealing gasket; The two opposite sides of the tank body are respectively equipped with inlet and outlet holes, with the inlet hole set at the lower end of one side and the outlet hole set at the upper end of the other side; The impeller is horizontally set inside the tank body, and bearings are installed at both ends of the impeller shaft. The bearings are installed in the bearing end caps, which are fixedly connected to the tank body by bolts. A sealing gasket is provided between the bearing end caps and the tank body.

Embodiment

[0014] The following specific embodiments illustrate the implementation of the present utility model. Those familiar with this technology can clearly understand the other advantages and effects of the present utility model from the content disclosed in this specification.

[0015] The following provides further explanation of the present utility model in conjunction with the accompanying drawings and embodiments:

[0016] As shown in Figures 1-3, a pesticide mixing tank comprises a tank body 1, an impeller 3, a bearing end cover 4, a sealing gasket 7, a bolt 5, and a bearing 6. The above-mentioned tank I is a material warehouse for pesticide mixing, where pesticides and water are mixed and blended. The two sides of tank I are equipped with inlet and outlet holes, which are arranged in a staggered manner. The inlet hole is set at the lower end of one side, and the outlet hole is set at the upper end of the other side. The two holes are arranged vertically, which is conducive to the further movement of pesticides in the tank and facilitates the thorough mixing of drugs; The impeller 3 is horizontally set inside the tank body I, and is fixed to the bearing cover plate 4 through the bearings 6 at both ends of the impeller shaft, so that the impeller 3 can rotate freely inside the tank body I; The above-mentioned bearing cover plate 4 is bolted and fixed to the tank body. To prevent leakage, a sealing gasket 7 is also provided between the bearing end cover 4 and the tank body I. When mixing pesticides, water rushes in from the inlet of the tank body I, pushing the impeller 3 to rotate. During the rotation, the impeller 3 continuously stirs the pesticides and incoming water in the tank body I to achieve sufficient mixing of pesticides and water, making pesticide mixing more uniform.

[0017] Furthermore, due to the fact that the amount of pesticide raw materials used as solutes is often relatively small compared to solvent water in the process of pesticide preparation, it is necessary to accurately measure the amount of pesticide added, and there should be no scattering during the addition process. At the same time, in order to protect the environment, a funnel 2 is specially installed on the tank body I mentioned above, which is used to measure the amount of pesticide added and prevent pesticide splashing during pesticide addition. The top of the funnel can be connected with flanges for easy assembly and disassembly, or directly welded and fixed to the tank body

Ii1

[0018] Furthermore, in order to reduce the weight of the impeller, increase the rotational speed of the impeller under the impact of water, and more fully stir pesticides, the impeller blades are made in a hollow form to reduce resistance; To simplify manufacturing, it can be achieved by cutting the steel wire mesh or rigid fence into blocks and welding them onto the impeller shaft.

[0019] Furthermore, in order to increase the impact torque of water on the impeller 3 and increase the impeller speed, the inlet of the tank I is set at a quarter height position of the tank I. The water flowing into the inlet at this position has a greater impact torque on the impeller 3, which can increase the speed of the impeller 3 and further homogenize the pesticide mixture.

[0020] Furthermore, in order to prevent the bearings from being corroded by pesticides, which may cause the impeller 3 to become inflexible or stuck, stainless steel bearings are preferred for the above-mentioned bearings.

[0021] For the convenience of being used in conjunction with external equipment, the above-mentioned tank can be equipped with a steel frame at the bottom of the tank for easy placement. The inlet and outlet ends can be welded with quick change pipe joints for easy connection with the external pipeline system. It is best to use high-pressure water chestnuts for the external pipeline system, which can increase the impact of water flow on the impeller, improve the impeller speed, and fully mix pesticides.

[0022] The above embodiments are only illustrative of the principle and efficacy of the present utility model, and are not intended to limit the present utility model. Anyone familiar with this technology can modify or change the above embodiments without violating the spirit and scope of the present utility model. Therefore, all equivalent modifications or changes made by those with ordinary knowledge in the relevant technical field without departing from the spirit and technical ideas disclosed in this utility model should still be covered by the claims of this utility model.