The angle of repose tester is suitable for routine measurement of the angle of repose of non agglomerated powder or granular surfactants and laundry detergents, and can also be used for measuring the angle of repose of other powders and particles with similar properties. The cone base angle obtained by the flow of materials under specified conditions is called the angle of repose

Disc: diameter10mm

Funnel: outer diameter155mm inside diameter145mm

1、Compliant withGB-T11986-98

2Technical specification for determination of angle of repose of surfactant powders and particles..

3The product meets the requirements of easy use and maintenance, safety and reliability, economic rationality, and practical beauty.

4Installation, debugging, and usage methods of instruments

5Confirm the horizontal state of the experimental platform where this instrument is to be placed,According toGB-T11986-98

Assembly diagram and technical specifications for measuring the angle of repose of surfactant powder and particles, and installation of instruments.

1Installation of instruments.60The guide rod of this instrument bracket is divided into four adjustable sliding sleeves, starting from the top, which are the stirring device sliding sleeve and the glass funnelFixed sleeve and discharge port at the taper angle10mm

2Move the slide sleeve and the ruler slide sleeve.60Release and remove the stirring device and sliding sleeve, and pass the glass funnel throughFixed at the taper angle, and the lower discharge port passes through the discharge port10mm

3Fix it and visually adjust it to be perpendicular to the base.Adjust the inner diameter100mm, height25mm

4The container is placed in the central store with reference to the bottom plate scaleAdjust the discharge port and bottom plate under the glass funnel100mm

5The height value.

6According to the fixed mixing device and above the glass funnel, visually adjust the appropriate height and fix it.