Standard testing requirements:

1. The test object rotates around the X-axis at a speed of 6 °/s for 360 °, then rotates in increments of 90 °, maintaining the rotation for 1 hour every 90 ° increment, stopping at 360 ° rotation, and observing for 2 hours.

2. The test object rotates around the Y-axis at a speed of 6 °/s for 360 °, then rotates in increments of 90 °, maintaining the rotation for 1 hour every 90 ° increment, stopping at 360 ° rotation, and observing for 2 hours.

3. Test requirements: The battery or system should have no leakage, shell rupture, fire or explosion, and maintain reliable connection and intact structure. The insulation resistance after the test should not be less than 100 Ω/v.

Main technical parameters of the equipment:

1. Operation mode: program mode, fixed value mode;

2. Drive mode: Panasonic servo motor drive from Japan, capable of meeting the maximum sample size of 500kg battery pack for flipping test;

3. Control and operation mode: independent touch screen PLC control+remote WIFI control;

4. Flip table top maximum load-bearing capacity: 500kg (other specifications can be customized);

5. Flip table size: (width) 1800mm × (length) 3000mm;

6. The center of the flipping table is 1550mm above the ground;

7. Rotation angle: 0-360 °, continuously adjustable;

8. Rotation direction: X-axis, Y-axis, manual conversion;

9. Flip platform speed: The rotation speed of the flip platform can be adjusted from 1 °/s to 12 °/s, and an angle dial is installed at the rotation axis; The default control speed is 6 °/s, which can be set using software;

10. Accuracy requirement: Control accuracy: Flip speed accuracy should be controlled within ± 1 °/s; Flip angle controlled within 0.5 °; Time accuracy not less than ± 0.1%;

11. Angle resolution: ≤ 0.5°；

12. Speed resolution: ≤ 0.5°/s ；

13. Program settings: Operating the touch screen can set flipping speed, flipping time, flipping angle, flipping cycles, intermediate idle time, etc;

14. Recording function: (speed, angle, time, number of cycles): The sampling frequency is up to 10Hz, which can record the detection and setting test curves, data, operation records, and alarm records within 24 months;

9. Equipment power supply: AC 380V/50HZ ，3.8KW ；

10. External dimensions: （W*D*H）3300*2500*1750mm；

11. Whole machine weight: approximately 1500KG.