YPL series pressure spray granulation drying unit is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spherical particles in a certain size ratio.

The working process of this unit involves the high-pressure input of material liquid through a diaphragm pump, spraying mist like droplets, and then flowing down in parallel with hot air. Most of the powder particles are collected by the bottom discharge port of the tower, and the exhaust gas and its small powder are separated by a cyclone separator. The exhaust gas is discharged by a suction fan, and the powder is collected by a pollination tube located at the lower end of the cyclone separator. The fan outlet can also be equipped with a secondary dust removal device, with a recovery rate of over 96-98%.

The tower body, pipeline, and separator materials in contact with the materials of this unit are all made of SUS304. There is sufficient moisture retention layer between the interior of the tower and the outer shell, and the filling material is ultra-fine glass wool. The tower is equipped with observation doors, mirrors, light sources, and control instruments, which are controlled and displayed by an electrical control console.

The heat source device of this unit adopts steam heating or electric heater, which has the advantages of easy operation, fast start-up, compact structure, and clean hot air. In addition, a control and regulation device for an electric heater is installed in the electrical control cabinet to continuously adjust the inlet temperature. For areas with power shortages, steam heating or coal-fired hot air stoves can be used to partially or completely replace the electric heating device. Our factory can provide the heating method according to the actual needs of users.

Scope of application:

characteristic:

The drying speed of the image keywords is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95% -98% of the water can be evaporated instantly, and the drying time only needs tens of seconds to tens of seconds. It is particularly suitable for drying heat sensitive materials. All products are spherical particles with uniform particle size, good flowability, good solubility, high product purity, and good quality.

The use of image keywords is wide, and according to the characteristics of the material, it can be dried with hot air or granulated with cold air, with strong adaptability to the material. Simple and stable operation, convenient control, and easy implementation of automated tasks.

Technical parameters:

Changzhou Wansheng Drying Equipment Co., Ltd. is a professional manufacturerFluidized bed dryer, spray dryer, flash dryerA manufacturing enterprise with strong product development capabilities, offering dozens of product varieties that sell well both domestically and internationally.

Our company has various equipment for drying materials such as powder, block, strip, granular, filter cake, solution, paste, etc., which can help users select drying experiments for various materials, so as to choose low input, low-energy drying and dust removal equipment and output optimized drying technology to the outside world.

Our company has technology, sophisticated equipment, and design talents. The product has stable performance, low price, and thoughtful service, and is highly recognized and praised by customers both domestically and internationally! Our company warmly welcomes new and old friends from all walks of life to come to our factory for on-site inspection, guidance, and negotiation of cooperation!