Price of ultra-high temperature instantaneous sterilization machineWorking principle

Generally, materials are preheated by being pumped into the hot and cold material heat exchange device of the sterilization machine by a centrifugal pump, and then quickly heated to the sterilization temperature through a high-temperature bucket filled with high pressure, and maintained for about 3 seconds before and after this. Microorganisms and enzymes in the material are quickly killed. After the material is discharged from the high-temperature barrel, it is cooled by heat exchange with the cold material, usually at a temperature below 65 ℃. If the temperature needs to be increased in the next process, it can be achieved by adjusting the angle type shut-off valve or circulation, etc. Otherwise, the discharge temperature can be reduced by connecting cooling water. The discharge is controlled by a throttle valve, which can keep the boiling point of the material above high temperature while maintaining a certain pressure. During normal production, adjust this valve to generate back pressure control flow by overcoming spring pressure with the driving force of the pump. When cleaning and sterilizing the machine, it should be fully opened. The circulating storage tank can be used to prepare acid-base solutions and effectively clean the scale on the inner wall of the coil. Due to the simultaneous use of stainless steel three-way plugs, the flow rate can be appropriately adjusted.

Price of ultra-high temperature instantaneous sterilization machineEquipment features

1. Continuous production with short sterilization time.

2. Due to the short heating time, high-quality products can be obtained.

3. Due to the use of ultra-high temperature sterilization, the sterilization effect is particularly good.

4. Used in series with centrifugal pumps or high-pressure homogenizers, it has a wide range of applications and is suitable for sterilizing high viscosity materials.

5. Due to the economic benefits of waste heat utilization in the design of heat exchangers with hot and cold materials, the steam consumption is low.

Application scope

This equipment is applicable to the instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverage, ice cream, ice cream slurry, soy sauce, soybean milk, condensed milk, alcohol, etc., as well as the sterilization of fluid materials. The feeding and discharging of this equipment are both equipped with three-way valves, and the flow rate can be adjusted as needed, ensuring reliable use.