VIP member
Pulling machine
The Dyna pull-out tester measures the adhesion of coatings on different substrates in a very easy-to-use way. Its main purpose is to measure the adhes
Product details
| Whether to provide customized processing: No | Brand: Proceq | model: DYNA |
| Type: Hydraulic tensile testing machine | Measurement range: 6KN, 16KN （KN） | Measurement accuracy: 0.01 |
| Maximum load: 16 (KN) | Stretching space:- （mm） | Stretching speed:- （mm/min） |
DYNA concrete pull-out tester
The Dyna pull-out tester measures the adhesion of coatings on different substrates in a very easy-to-use way. Its main purpose is to measure the adhesion of concrete structure coatings and the tensile strength of concrete.
With the Dyna tester, testing can be conducted at any point on the structure without the need to install testing equipment on concrete.
Dyna is essential for diagnosing damage to building structures and inspecting completed repair projects.
characteristic:
- Comprehensive digital pressure gauge (metric and imperial units)
- Portable and capable of almost any testing occasion.
- Lightweight and precise
- Due to the smooth operation of the crank transmission device, no external power supply is required
- Uniform loading
- There are also power transmission equipment available for selection
Purpose:
- Measure the adhesion of applied coatings, such as plastic or concrete coatings, plaster coatings, gypsum coatings, asphalt coatings, and coatings on metals.
- Measure the surface strength of concrete and other substrates
- Zui is suitable for evaluating the tensile strength in concrete renovation
Product variation:
- Dyna Z series (for measuring adhesion and tensile strength), equipped with a comprehensive digital pressure gauge
- The Dyna ZE series pull-out tester (used to measure adhesion and tensile strength) is equipped with a pressure sensor and DYNAMETER electronic display device, which can easily transmit data to a computer or printer for further analysis
- There are also EDm power transmission equipment available for selection
- Dyna Estrich is a specially designed tester that uses absolute non-destructive testing methods to measure the adhesion of floor coatings.
Technical data:
| Dyna Z and Dyna ZE | ||||
| Dyna Z | Dyna ZE | |||
| Z16 | Z6 | Z16 | Z6 | |
| pull | 16kN (3’600 lbf) |
6 kN (1’350 lbf) |
16 kN (3’600 lbf) |
6 kN (1’350 lbf) |
| resolving power | 0.01 N/mm² | |||
| error | < 2% | < 1% | ||
| Allow stroke | 3.5 mm | 4.0 mm | 3.5 mm | 4.0 mm |
| weight | 3.5 kg (7 lbs 11 oz) | |||
| Battery | The pressure gauge uses CR 2430 type, with an operating time of up to 150 hours | Please refer to the following text to display the technical data of the unit | ||
| Operating temperature | 0 ° to +60 °C (32 °F to 140 °F) | |||
| Storage temperature | -10 ° to 60 °C (14 °F to 140 °F) | |||
| Total weight | 6 kg (13 lbs) | 7.8 kg (17 lbs) | ||
| Dyna ZE - Dynameter display device | |
| Storage | Non volatile memory, capable of storing 1000 test values |
| monitor | 128 × 128 pixel LCD display with backlight |
| data output | RS-232 interface or USB adapter |
| Software | Integrated software for transmitting test values to a printer or computer, WIGAonline Software |
| Battery | 6 LR6 (AA), 1.5 V (60 hour operation) |
| weight | 1.8 kg (4 lbs) |
| Dyna Estrich | |
| monitor | Calculated in N/mm2, based on a test disk with a diameter of 50 millimeters |
| Tensile strength | The maximum value of zui is 4400 N (990 lbf) |
| tensile strength | 2.2 N/mm2 (320 psi) |
| error | < 3 % |
| Tensile stroke | 20 mm (0.79 in.) |
| Total weight | 2.8 kg (6 lbs) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-