Pulsar multi-component gas online analysis system-Fornitore globale

13th Floor, Building E, Chang'an Center, Financial Street, No. 26 Chengtong Street, Shijingshan District, Beijing

The 4th generation PULSAR multi-component gas online analysis system from Signal in the UK is a high-performance and easy-to-use analysis platform with new technology. At present, it has been upgraded to the most advanced technological performance in the history of this product line. The minimal monitoring data drift can be perfectly applied to ultra-low emission conditions and high-precision measurements. The unique design of the detector effectively prevents cross interference between gases and eliminates the risk of particulate pollution. The Pulsar system can therefore be applied to various working conditions.

The 4th generation Pulsar multi-component gas online analysis system uses gas filtering technology to measure only relevant gases, with almost no interference from other gases. The optical experimental platform is placed in a heating chamber, and for non condensable sample gases, an external cooler is not required. There is no interference from water vapor. By using two sampling chambers of different lengths in series, low range and high range can be selected, thereby increasing the entire range. The parallel dual optical experimental platform version can also be used for measuring two different gases or two ranges of continuous operation of the same gas.

Product features:

Using advanced software with 4th order polynomials to ensure linear response and maintain high accuracy throughout the entire range.

Each range of each channel can be linearized or independently calibrated by the user.

The analyzer uses standard remote interface software (S4i) to achieve remote data acquisition and diagnostic functions.

Open source software provides rich features that can be customized according to needs.

The range of the system is optional, and multiple ranges can be calibrated.

The system configuration relay can select this calibration gas and automatically calibrate each range.

The 4th generation system can be equipped with a touch screen, intuitive menu structure, and can perform simple operations, calibration, fault finding, etc.

The screen panel is equipped with USB or SD card for in car data acquisition.

Types of detectable gases: CO、CO₂、 CH₄、 NO、N₂O、SO₂_、HCl、O₂

Multiple alarm mode settings:

1. Concentration limit (user set)

2. Sample gas flow rate (exceeding the limit)

3. Sampling pump malfunction

4. Heating chamber malfunction

5. Voltage exceeds the limit

6. Thermocouple malfunction

7. Configuration failure

8. Incorrect option settings

9. Infrared motor malfunction

10. Infrared source malfunction

11. Calculation error (no calibration settings)

Application conditions: CEMS、 Research, regulatory verification, gas purity, automotive industry, air quality, process industry, combustion

Technical parameters:

Range: Refer to the independent color page

Zero drift: 1% FS/week

Range drift: 1% FS/24 hours

Preheating time: measurable in 15 minutes, parameters can be obtained in 1 hour

Output signal: TCP/IP, RS232/AK protocol, 0-10 VDC optional 4-20mA Canbus

Remote operation: Complete software running window VB

Sample gas temperature: 5 º C-40 º C without condensation

Power supply requirements: 110/220V 50/60 Hz, 24VDC, 70-350 Watts (depending on the number of channels)

Material used: 316 stainless steel PTFE、 Quartz and fluorite

Size: 19 "x 133.5mm x 530mm

Weight:< 23 Kg

Options: Color touch screen front panel with USB and SD card interfaces, sampling pump, single or all measurement channel sample gas/standard gas/zero gas option valves, programmable contact closure (can set standard gas and zero gas valves for each measurement channel and range), air pressure compensation.