Pulse controller-Fornitore globale

Room 112, Yulongyuan Office Building, No. 37 Zaolinqian Street, Baiguang Road, Xicheng District, Beijing

The pulse controller adopts an external multifunctional input port, suitable for both differential pressure control and external switch+timing control, and can also achieve remote control of the controller. The ash discharge valve control with fixed output port can be set through the panel to achieve the set time ash discharge control under the set cycle period
　　JMK-4 pulse controllerIt is a contactless WMK-3 replacement product, with the same electrical performance and working principle as the 3rd generation product. Significant improvements have been made in circuit design, component usage, and chassis structure. The output part of the pulse controller is divided into 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 27, 30, 32, 36, and 40 positions respectively. The pulse valve controller has several voltages including 24V, 36V, 100V, and AC220V. The pulse controller adopts the currently advanced WOS digital integrated circuit, which has a beautiful and elegant appearance, stable performance, and significantly improves the reliability of the instrument. It also has strong anti-interference ability and easy maintenance. In the circuit design, short-circuit automatic protection has been added. LED display circuit is more conducive to extending the service life.

Working principle

The pulse controller uses industrial grade chips as the control core; There are obvious setting marks on the printed circuit board, which can facilitate the setting of the controller; The output side of the controller is equipped with working indicators for each output point, which can quickly determine the status of the output points; The control device is equipped with manual operation buttons, which can facilitate equipment debugging and operation; The pulse controller adopts a waterproof shell structure and a waterproof joint, which can be used outdoors and in dusty environments; And the pulse controller is equipped with pluggable printed circuit board dedicated terminals, which can be easily wired.

Each output terminal controls the opening of the electromagnetic pulse valve, sprays compressed air for dust removal, and displays the spraying sequence with a light-emitting diode. When the dust collector cleans the dust, it filters and sprays the dust at the same time. The pulse controller outputs an electrical signal according to the set pulse width and pulse interval to control the pulse valve to spray the dust one by one.