VIP member
Purging type planar radar level gauge
The blowdown type planar radar level gauge comes with a blowdown system that is suitable for use in harsh and strong dust, steam, and material adhesio
Product details
The blowdown type planar radar level gauge comes with a blowdown system that is suitable for use in harsh and strong dust, steam, and material adhesion, as well as for measuring objects at the bottom of conical tanks. Meister is committed to building the most professional manufacturer of blow off flat radar level gauges in China. Meister Instruments specializes in producing blow off flat radar level gauges, and every blow off flat radar level gauge is meticulously crafted to provide you with the highest quality products and services. Meister is committed to building the most professional blow off flat radar level gauge manufacturer in China.
Technical parameters of blowing flat radar level gauge
Frequency: 26GHz
Measurement distance: 20M
Resolution: 1mm
Accuracy: ± 10mm
Return deviation: ± 5mm
Blind spot: 0.7M
Measurement interval: ≥ 1s, according to the set parameters
Response speed: ≥ 5s, according to the set parameters
Wave speed: ＜ 6°
Size: 12 * 12 * 34.5cm
Installation: flange installation with blowing system
Process temperature:- 40℃-80℃
Process pressure: atmospheric pressure
Relative humidity:< 95%RH
Antenna material: SS304L/SS316L
Power supply: 16-36VDC two-wire/four wire
Signal output: HART/4～20mA/RS485
Fault output: No change/22mA/20.5mA/4mA
Maximum load: 500 Ω
Communication: HART/RS485
On site display: LCD display
Protection level: IP67
Cable entrance: M20x1.5
Recommended cables: AWG18 or 0.75mm ² cable
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-