Product Overview of QBY-L Aluminum Alloy Pneumatic Diaphragm Pump:

aluminum alloyPneumatic diaphragm pumpUsing compressed gas as the power source, it can extract and absorb corrosive liquids, liquids with particles, high viscosity, volatile, flammable, and highly toxic liquids.Pneumatic diaphragm pumpThere are four materials: plastic, aluminum alloy, cast iron, and stainless steel. Pneumatic diaphragm pumps use nitrile rubber, chloroprene rubber, fluororubber, polytetrafluoroethylene, and polytetrafluoroethylene according to different liquid media. Placed in various occasions, used to transport media that cannot be pumped by conventional pumps.

1. Due to the use of gas as a power source, the flow rate is actively adjusted with changes in back pressure (outlet resistance), making it suitable for fluids with medium to high viscosity. The working point of the centrifugal pump is set based on water, and if it is used for fluids with slightly higher viscosity, it needs to be matched with a reducer or frequency converter.
2. Using pneumatic pumps in flammable and explosive environments with low cost, such as fuel transportation, because: it is impossible to generate sparks after grounding; No heat is generated during work, and the machine will not overheat; The fluid will not overheat because the pneumatic diaphragm pump has less agitation on the fluid.
3. In harsh construction sites, such as construction sites and industrial and mining wastewater discharge, due to the high impurities and complex composition in the sewage, the pipelines are prone to blockage, which creates an environment with excessive load on the electric pump and makes the motor vulnerable to heating. Pneumatic diaphragm pump can pass particles and has adjustable flow rate, and it automatically stops when the pipeline is blocked.
4. In addition, the pneumatic diaphragm pump has a small volume, is easy to move, does not require a foundation, occupies a small area, and is easy and economical to install. Can be used as a mobile material conveying pump.
5. In the handling of hazardous and corrosive materials, diaphragm pumps can isolate the materials from the outside world.
6. Or some experiments may not have impurities contaminating the raw materials.
7. Can be used to transport fluids with relatively unstable chemical properties, such as photosensitive materials, flocculants, etc. This is because the shear force of the diaphragm pump is low and has little physical impact on the material.

QBY-L typealuminum alloyPneumatic diaphragm pump product usage:

1. Diaphragm pump suction for peanut butter, kimchi, mashed potatoes, small red sausage, jam apple puree, chocolate, etc.
2. Diaphragm pumps suck paint, gum, and pigments.
3. Adhesive and glue can be pumped up.
4. Various types of tiles, porcelain, bricks, and ceramic glazes.
5. After drilling the oil well, use a pump to suck up sediment and grout.
6. Pump various emulsions and fillers.
7. Pump various types of sewage.
8. Use a pump as an oil tanker and a barge to extract sewage from the warehouse.
9. Hops and fermented powder slurry, syrup, sugar dense.
10. Pump water from mines, tunnels, ore dressing, and slag. Pump cement grout and mortar.
11. Various rubber pastes.
12. Various abrasives, corrosives, petroleum and mud, cleaning oil stains, and general containers.
13. Various highly toxic, flammable, and volatile liquids.
14. Various strong acids, strong alkalis, and highly corrosive liquids.
15. Various high-temperature liquids can withstand up to 150 ℃.
16. As a front-end compression device for various solid-liquid separation equipment

QBY-L typealuminum alloyThe meaning of pneumatic diaphragm pump model:

QBY-L typealuminum alloyWorking principle of pneumatic diaphragm pump:

QBY-L typealuminum alloyPneumatic diaphragm pump installation system:

QBY-L typealuminum alloyInstallation method of pneumatic diaphragm pump:

QBY-L typealuminum alloyPerformance parameters of pneumatic diaphragm pump: