Purpose:

The QX bridge sand suction machine can be used in the horizontal flow sedimentation of sewage treatment plants to remove the sedimentation at the bottom of the tank.

Structural principle:

The QX bridge sand suction machine is mainly composed of main beam, track, driving device, sand suction system, skimming device, collecting device and other parts.

The QX bridge sand suction machine is placed on the steel rail at the top of the sedimentation tank, and automatically runs back and forth along the track in the direction of the tank length according to the set working cycle. The sand suction pump on the sand suction machine lifts and lifts the sand water mixture at the bottom of the sedimentation tank, allowing it to enter the sand water separator for separation. At the same time, the skimming mechanism installed on the sand suction machine scrapes the floating slag on the water surface into the slag tank at the end of the sedimentation tank.

characteristic:

1. Choose a submersible sewage pump with high sand suction efficiency.

2. Reasonable structure and smooth movement.

3. Easy to operate and convenient to maintain.

Ordering instructions:

1. Please indicate whether the main material of the equipment is carbon steel or stainless steel.

2. This machine does not include tracks, please indicate if necessary.

3. Please indicate whether a skim board and sand lifting method are required.

4. The flow rate of the sand suction pump can be configured according to user requirements.

5. The pool width and depth can be designed according to user requirements.

6. There are two transmission methods available for users to choose from: sliding wire and suspended cable.