Instrument features:

1. The sample usage is minimal, allowing for rapid testing and easy cleaning.

2. During measurement, the shear rate and shear stress can be controlled to study the process from initial yield to flow of materials.

3. Temperature control can be achieved through circulating water bath, Peltier or electronic heating methods. The use of a Peltier temperature control system can quickly raise the temperature of the sample plate, thereby obtaining a fast viscosity temperature curve.

4. Multiple rotor options to meet different sample testing needs.

5. The board measurement system can test high filling samples.

The operating modes include:

Control Shear Stress Rate (RPM)

Control shear stress (torque torque)

Single machine operation (without the need for a computer)

Fully computer-controlled

The testing methods include:

Shear stress loop test;

Shear stress slope test;

Single point or multi-point viscosity measurement;

Temperature ramp test;

Intuitive QC/QA inspection.

The following characteristics can be measured:

Pseudo plastic (shear thinning) behavior

Thixotropy (time-dependent)

Temperature influence

Yield point

Instrument composition:Host, a rotor selected by the customer: cone rotor or plate rotor

Optional Accessories：Rheo3000 software, standard solution, optional rotor, water bath, solvent splash guard, insulation layer

Application:
When choosing different models, it is important to consider what sample you are applying to and what the viscosity range of the sample is.
1. Low viscosity objects
Chemicals, oils, petroleum products, cosmetics, paints, coatings, daily chemical products, pharmaceuticals, inks, photosensitive resins, fruit juices, polymer solutions, latex, rubber solutions
2. Medium viscosity objects
Hot melt adhesive, paint, ceramic slurry, paper coating, frost like objects, pulp, daily chemical products, plastic sol, food, surface coating, resin, gum, toothpaste, screen printing ink, brightener, organic solvent
3. High viscosity objects
Asphalt, paste, patching compound, peanut butter, chocolate, putty, plaster, epoxy resin, roof material, gel, sealant, ink, sheet molding compound, ballpoint pen ink, tablet printing ink, molasses, tar

Temperature control method:

Circulating water bath (temperature range depends on the selected water bath liquid, from -20 º C to 250 º C)

Built in Peltier controller (0 to 135 º C or 20 to 180 º C)

Built in Electronic Controller (50 to 250 º C)